sherpa_man
Inspired
Hi,
i am wondering if anybody has figured out away or maybe its been sorted with a firmware update. I am trying to create a patch with a arpeggiator and a trem, but the trem keeps loosing time, This is what i had back from fractal a while ago explaining it, but i mam hoping its something that could be automated rather than having to switch it on and off every 8 measures. hope this makes sense
This is called DRIFT and it happens normally.
You can evade this by re-starting both cycles as follows:
i am wondering if anybody has figured out away or maybe its been sorted with a firmware update. I am trying to create a patch with a arpeggiator and a trem, but the trem keeps loosing time, This is what i had back from fractal a while ago explaining it, but i mam hoping its something that could be automated rather than having to switch it on and off every 8 measures. hope this makes sense
This is called DRIFT and it happens normally.
You can evade this by re-starting both cycles as follows:
- Use LF01 in controllers with a volume block to create your tremolo.
- Use a modifier such as an External Controller using MIDI or a footswitch to START and STOP the LFO and your sequencer at the same time. If you're using a sequencer, you can do a quick STOP/START every 8 measures or so. If you're using a footswitch, a quick tap off, then tap on the beat will re-sync everything.