Assigning momentary switch to FC12

[boardwlk17]

I'm trying to set up a momentary switch on a pitch block bypass Using one of the FC12 switches can't figure it out.
Thanks

 

[unix-guy]

What have you tried?

Make sure you're not trying to assign it to switch #6.

 

[Moke]

Try using a Control Switch assigned to the Bypass parameter.

 

[boardwlk17]

Got it to work but there's a delay when I press n hold scene 2 to activate Pitch block

 

[unix-guy]

Got it to work but there's a delay when I press n hold scene 2 to activate Pitch block

Because it's a Hold function.

Assign it on a Tap function instead.

 

[Moke]

Got it to work but there's a delay when I press n hold scene 2 to activate Pitch block

That's what hold functions do. The operating system has no way of knowing whether you are doing the tap or hold function at first. So it has to wait a prescribed time to determine that it is not the tap function, and at that point fires off the hold function.

 

[boardwlk17]

don't I have to keep the tap function for scene number 2

 

[unix-guy]

don't I have to keep the tap function for scene number 2

You don't have to keep anything... What you assign to switches is entirely up to you.

 

[boardwlk17]

I know I'll just go back to the external control switch, That's what I get for trying to make things easier