Wish Add Speaker Impedance Curves of a Pacific Woodworks 1x12 cab (ZMA included)

km 202257

Inspired
As the title says, this is a request to add Speaker Impedance Curves of a Pacific Woodworks 1x12 cab.
Attached zip includes ZMA files of the said cab measured by myself. 2 versions are available - 1. the cab with a EVM12L speaker, and 2. the cab with a Celestion Vintage 30.

I shot the IRs of the said cabs/speakers and made it public in this forum (https://forum.fractalaudio.com/thre...-v30-48-irs-in-total-fullres-included.186164/).
The problem is that I don't have any SICs to recommend with these IRs, which is why I decided to post this request.

I checked all the existing SICs to see if they would work as alternatives but didn't have luck finding one that matched with my measurement.
While 9 SICs listed below shares the similar SIC shape (2 spikes in low frequencies), none can be tweaked to have its peaks matched to either 33.7Hz&113.3Hz (for EVM12L version) or 42.5Hz&127.3Hz (for V30 version):
  • 5 1x12 AC-20 DLX
  • 9 1x12 Brit G12M
  • 15 1x12 Dirty Shirley EV12L
  • 18 1x12 Jr Blues
  • 22 1x12 USA Ext EV12L
  • 23 1x12 V30
  • 39 2x12 Hot Kitty
  • 59 4x12 Hipower
  • 60 4x12 Hipower Lindsey B
I understand PW 1x12 was one of the popular cabs among studio session musicians in 80's-early 90's, so I expect there are Fractal owners wanting to have an accurate sim of it.
Unless SICs seem to have measurement flaws, it is much appreciated if FAS can consider adding these SICs to Amp block. Of course, I will try to address requests for re-measurement or other information as much as possible if needed.

* Picture of measured SICs:

SIC PW+EVM12L.jpgSIC PW+V30.jpg
 

Attachments

  • Pacific Woodworks 1x12 SICs (km.202257).zip
    7.1 KB · Views: 0
Please excuse me to bump this thread - knowing that not having replies from other members indicate very limited demand on this, but just in case FAS team might have missed my wish
 
Back
Top Bottom