• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. S

    Axe-Fx III Firmware Version 5.05

    You know... this is yet another fantastic thing about the folks at FAS. Cliff takes time to in-service the community on this kind of stuff. Just another way he shows his commitment to the community of FAS product users. Thanks Cliff! You have few equals.
  2. S

    FIXED: Axe-Fx III Logic Issues

    Thank you so much!
  3. S

    [FIXED] Change Preset via MFC-101 selecting Scene 2 as well

    Bingo! I have CC# 120 set for Scene Increment. When I change that to None, the problem disappears. The problem was that I had IA09 and IA10 set to Scene Decrement/Increment AND the MFC was set to "Send w/ Prst" to "Yes" for those IAs. Once I set IA09 and IA10 to "Send w/ Prst" to "No"...
  4. S

    [FIXED] Change Preset via MFC-101 selecting Scene 2 as well

    No, no preset mapping. The MFC is in “None” mode, so it’s just acting like a MIDI controller. I also made sure that IA01-05 on the MFC were not set up to send multiple CC commands. The c2 setting for each is set to CC# = None. I’m considering reinstalling firmware 1.08 and seeing if the...
  5. S

    [FIXED] Change Preset via MFC-101 selecting Scene 2 as well

    No, if I change via the front panel or AxeEdit, it uses the “As Saved” setting and selects the appropriate scene.
  6. S

    [FIXED] Change Preset via MFC-101 selecting Scene 2 as well

    Thanks Chris! I had tried that very thing originally. I just tried it again to confirmed. Even if "Scene Select" is none, the preset change still selects Scene 2.
  7. S

    [FIXED] Change Preset via MFC-101 selecting Scene 2 as well

    Hi all, I'm looking to figure out what I'm doing wrong with setting up my MFC101 to work with the III over MIDI (or if I found a bug). I'm running firmware 1.09 Beta and MFC firmware 3.08. My MFC is set to have bank size = 5, so that the bottom 5 switches change presets. I've set up those...
  8. S

    Axe-Fx III and MFC-101 Mark 1

    The Faslink on the III is not the same as on the II. You’ll need to talk to the III over MIDI. If the mark I doesn’t have a MIDI out, you’re out of luck.
  9. S

    Front vs. Rear input on the Axe III

    They’re not the same on the XL+ to my knowledge
  10. S

    Axe-Fx III wait list: Let us know when you get notified...

    Waitlist: 1/29/2018 at 9:33 PM (Eastern) Invite received: 5/8/2018 at 1:08 PM (Eastern) Ordered minutes later! WOO HOO!!!
  11. S

    Axe FX XL+ with Mesa Mark V Experiences ?

    Yes, I am using the MFC to change patches and, accordingly, make the necessary changes on the Mark V. I haven't looked hard enough to see if your can use Scene changes to toggle changes in the MAG. I think the MAG is more built to respond to the program change MIDI commands associated with...
  12. S

    Axe FX XL+ with Mesa Mark V Experiences ?

    I have the XL+ and Mark V, set up in the 4CM. I am using the Mini Amp Gizmo to do the switching over MIDI. Works great for me. I can't comment on the noise levels, but, at my volume levels (loud basement levels :) ), I have no complaints.
  13. S

    New User, 2 Dumb Questions

    I think 2) is because of the Auto-engage setting being set to Medium Speed. Try setting that to off.
  14. S

    Mesa Boogie Mark V + Axe FX 2 + MFC-101

    I have the same rig and I have NOT been able to get scene changes to cause channel changes on the Mark V via the Mini Amp Gizmo. I think the Amp Gizmo only responds to Program Change MIDI commands. I think Scene changes are CC commands. Would love to be corrected though... :)
  15. S

    Somebody stop me! (getting my MASK on) ... Boogie MK V Combo

    I have a Mark V head and an AxeFx. The V sounds awesome even at low volumes, but, if your looking for versatility, stick with your AxeFx. You can also consider the 4CM with the V combo for your effects.
  16. S

    4 cm method issue with mesa mark v25

    Yes, I am referring to the "Send Level" knob on the back of the amp. If it is too low, the sound will be crappy coming out of the Mark's pre-amp. I have my Mark V's set just past noon and have Input 2 on the I/O page in the AxeFx set to 18.8% to prevent clipping. You may also want to review...
  17. S

    4 cm method issue with mesa mark v25

    Have you checked the effect send level on the Mark? I had to tweak this with my 4CM and my Mark V.
  18. S

    Axe-Fx II "Quantum" Rev 2.00 Firmware Release

    Sweet! Happy weekend for us all Thanks Cliff and team!
  19. S

    Pull Me Under...

    Where'd you get backing track? Jammit?
  20. S

    "Attempted" No More Tears

    Nice job!
  21. S

    Axe-Fx II "Quantum" 2.00 Public Beta Numero Tres

    Awesome! Thanks FAS Team!
  22. S

    Halp! axe and daw set up

    I would look into using ASIO4ALL to allow input/output routing like you want. Works great for me with PT.
  23. S

    Axe-Edit 3.3.0 available on Fractal Site

    LOL... check out the new Melt Faces behavior.... well played FAS...
  24. S

    MFC-101 Mk III and AxeFx II XL+ (Firmware 18) Name Timeout SOLVED!

    Hi everyone, Just FYI in case you have a problem like I just worked with Charlie at Fractal to overcome. I was running into the AxeFx Name Timeout issue with my brand new XL+ running Firmware 18 and a new MFC101 running Firmware 3.06. Bottom line was that the MFC 101 requires firmware version...
Top Bottom