• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. Paulg2uk

    FM9: G66 availability & waitlist

    I caught Frank's unboxing vid last night! Looking forward to seeing what he comes up with!
  2. Paulg2uk

    FM9: G66 availability & waitlist

    Did you guys catch Marco's vid the other day? He said the FM9 will be available in Europe in the 1st quarter of 2022. Not sure if this is actually correct or not but we all thought that would be a realistic timeframe. At least its not over a year like the FM3!
  3. Paulg2uk

    Mounting FM9 / FM3 / FC-12 / FC-6 to Temple Audio boards?

    EBS Flat ribbon cables from Amazon? They are great! Not expensive at all and they are really good quality. I have some custom made square plug cables also and I have to say a couple of them have decided not to work after switching my pedalboard around so much. The EBS ones though they seem to...
  4. Paulg2uk

    Mounting FM9 / FM3 / FC-12 / FC-6 to Temple Audio boards?

    That's a great idea Joe thanks for posting. I use Sukh's uni riser as well but have just used velcro on both sides to secure to my FC12 and FC6 to my Temple boards. When I get my FM9 I'm gonna get some medium Temple plates and try that. I like the idea of being able to loosen the thumbscrew's...
  5. Paulg2uk

    FM9: G66 availability & waitlist

    Nothing here! I get the feeling it will be a while yet. Marco did get his one last week. I think he has a live stream coming tomorrow all about it.
  6. Paulg2uk

    FM9: G66 availability & waitlist

    Same here, email sent on the 27/8. Also got my reply on the 28/8 at 11am GMT. Can't wait either. So tempted to sell my FM3 right now and use my Axe III for gigs etc but I'm gonna hang on to it for now. I did buy another Temple Audio board already for the FM9. I just want to be prepared for when...
  7. Paulg2uk

    FS Anyone In The UK Looking For A Pelican Air 1605 Case?

    Hi guys, Is anyone in the UK looking for a Pelican Air 1605 case by any chance? I bought this new earlier this year. I was going to use it with my FC6 board but have decided to go with a Mono soft case. This hasn't been used at all. The pick and pluck foam has been used. The base and lid foam...
  8. Paulg2uk

    Waitlist Email

    I was looking at the Gemini 2's as well. I asked Mission about this last week and got a reply from them. It was obviously a component shortage and they've now managed to secure the parts they need for them. They said that production is set to resume in a couple of weeks but they have backorders...
  9. Paulg2uk

    Sticking with the FM3? Upgrading to FM9? Why?

    Upgrading here too! For me there's some new features I really like that's in the Axe III. Extra CPU always handy, 2 amp blocks in one preset, one extra output. I usually run an external tuner on the III. I have to run an RJM tone saver buffer on the FM3 so I can use the tuner out now I don't...
  10. Paulg2uk

    Announcing the New FM9 Amp Modeler/FX Processor

    Extra output, Dual amp blocks and a headphone jack! Just those are enough for me to upgrade from the FM3 I'm in!. I'd still put it on a separate board and connect an FC6 or a 12 with it just cause I can lol. It's gonna be a while till we get them in Europe but it will definitely be worth the...
  11. Paulg2uk

    Any EBMM owners?

    The Cutlass would get you pretty close!
  12. Paulg2uk

    Any EBMM owners?

    Thanks Sash, Love your Firemist purple too!
  13. Paulg2uk

    Any EBMM owners?

    For me as I'm in a function band I have to cover a lot of ground tone wise with our sets. One I use in standard tuning which is my main guitar for the evening, the other one is tuned down a whole step for another tune we do and the 3rd one I use at home a lot. I guess I just want presets to...
  14. Paulg2uk

    Any EBMM owners?

    Ok here we go! Also a pic of my Majesty Nebula, Axis SS In Neptune Blue and also my JP15 in trans black. Enjoy!
  15. Paulg2uk

    Any EBMM owners?

    Very nice Sash! Shall I post a pic of my 3 Luke's as well?
  16. Paulg2uk

    Any EBMM owners?

    Me too Sash I couldn't resist either! HSS for me though. Got mine a few weeks back. Great minds think a like lol
  17. Paulg2uk

    Celestion F12-X200

    I bet they are. I just wouldn't have room for both cabs when I play live unfortunately! That's why I'm sticking to the Red Sounds as they are more compact for me.
  18. Paulg2uk

    Celestion F12-X200

    It is the same one on Ebay yes. I meant to post and let you all know how I was getting on. Sorry it's been mad busy with work and family stuff. Celestion very kindly replaced the speaker for me I installed it all and it's now all working great. I knew I wasn't going mad lol. I've decided to...
  19. Paulg2uk

    SOLD Anyone In The UK Looking to Swap Their FC12 For An FC6?

    Hi guys, Just checking before I list my FC6 on Ebay. Would anyone in the UK be interested in swapping their FC12 for my FC6? Happy to sell the FC6 within the UK as well. Probably looking for £460 + shipping. If you're interested please PM me. Cheers Paul
  20. Paulg2uk

    EV-1 / Temple Attachment Plate Question

    His site is down for maintenance at the moment but I'm sure it will be back up once all the new goodies have been added to the site. You don't have to use any led's with the glow riser. You can just use it to mount it to the board. Here's a pic from Sukh's FB page. He does make one for the EV-1...
  21. Paulg2uk

    EV-1 / Temple Attachment Plate Question

    Have you checked out Zenrig's (Sukh) glow riser? I use them on all my boards.
  22. Paulg2uk

    Let's see those FM3 rigs!

    I'm not using the TA pads no. I'm using Sukh's (Zenrigs) Uni riser and just some velcro. I find it easier to work with and I can always remove it easily and re attach to the board if need be. You're right they wouldn't be tall enough you'd need to make some sort of riser and then attach the TA...
  23. Paulg2uk

    Let's see those FM3 rigs!

    Good luck with the build. Looking forward to see some pics when you're done!
  24. Paulg2uk

    Let's see those FM3 rigs!

    I ended up using one of these. I just drilled out a little at a time until the IEC fitted through. I can't remember what size grommets they were but probably around 25mm I suppose. Might be a good idea to buy a few different sizes just I case you have a few cables you need to fit through the hole.
  25. Paulg2uk

    Let's see those FM3 rigs!

    My guess would be the IEC that is plugged into the FM3 is being powered by a Voodoo Lab pedal power 2 plus as that has a courtesy out IEC on it. The OP could have cut the IEC cable and pulled it through the Temple Board and then rewired the IEC plug on the other end. The Temple Audio module...
  26. Paulg2uk

    Celestion F12-X200

    Who knows! The seller could be trying it on but he seemed so genuine to me, you can never tell though. Its a bit strange that the original owner would do anything to it. I mean its not even a year old yet. I guess we will never know. I'm just glad its been sorted finally. I will definitely let...
  27. Paulg2uk

    Celestion F12-X200

    Hi guys, I hope you are all well. I have some good news this morning. I've heard back from Celestion and they've said the problem was a "Really nasty voice coil rub" causing the issue. Thank god they found the problem I thought I was going mad lol. They also said someone tried to modify the...
  28. Paulg2uk

    Let's see those FM3 rigs!

    Definitely a Duo 17 will do the job to put the FM3 on. I might add a PowerStage 170 as well which I don't think will fit on the Duo 17 with the FM3. I'll have to get another Duo 24. Did anyone manage to fit a Power stage 170 and FM3 on a Duo 17?
  29. Paulg2uk

    Let's see those FM3 rigs!

    I'd go for the Duo 34 to be honest and have both EV-1's on there. At least you know it will all fit without any problems. I guess it depends what functions your other EV1 is programmed to do connected to your FM3. It shouldn't affect it though as they are plugged into different inputs on the FC...
  30. Paulg2uk

    Let's see those FM3 rigs!

    Thank you! This is my Axe III board, I did have an FC12 board which was on a Temple duo 34 and looked pretty much the same but I ended up doing a swap with Sukh at Zenrigs for his FC6 which is now on my duo 34 board along with my FM3. I'm actually thinking about breaking up the FM3 board again...
  31. Paulg2uk

    Let's see those FM3 rigs!

    I get around 590mm working surface. I can get an FC6, 2 x EV2's and a Mission EP-1 on there plus a couple of other bits on there. You won't get an EV-1 on there. Maybe an EV-2 but it's still pretty snug. I hope that helps.
  32. Paulg2uk

    FM3 On A Separate Board? Or On The Same Board as Your FC6?

    Hi guys, I hope you are all well. I was just wondering what you all prefer in a live situation. Do you have your FM3 mounted on a separate board away from the front of the stage? Or do you have it mounted on the same board as your FC6, FC12 or other midi controller? Any reason why you prefer...
  33. Paulg2uk

    Celestion F12-X200

    Lol not quite but nearly. I hope so as well!
  34. Paulg2uk

    Celestion F12-X200

    I really hope so. It will be Interesting to see what they find when it's tested. I'll keep you all posted! Gotta go find a box now to pack up the F12.
  35. Paulg2uk

    Celestion F12-X200

    Just a quick update. Celestion have asked me to send the speaker into them next week so it can be tested. I've got to also send them some screen shots of my signal chain in the axe plus some info on my guitars. I'll just send them some links to the manufactures websites. Fingers crossed they...
  36. Paulg2uk

    Celestion F12-X200

    I did buy it used. I'm not sure if I can do anything to be honest the seller said he never had any issues with it. He seems like an honest guy but you never know at the end of the day. He did offer to make a claim for damages via the courier when he heard I was having problems. So that could...
  37. Paulg2uk

    Celestion F12-X200

    Speaker has now been removed and I've just tested it again. The distortion is still present! I think its safe to say it's definitely the speaker after all that lol. I've emailed Celestion back letting them know and I've taken a pic of the serial no label just in case they ask for it. Hopefully...
  38. Paulg2uk

    Celestion F12-X200

    Thanks Justin, I’ll check it all out later tonight when I get a chance. I hope so too. Worst way I have to buy another speaker but you never know Celestion might help me out.
  39. Paulg2uk

    Celestion F12-X200

    Hi guys, Update for you all. Heard back from Celestion this morning. They've now told me to remove the speaker from the cab and test it again as Justin advised me to. Also to gently push the cone in with my fingers to see if there's any coil rub. The last test would've ruled out the problem...
  40. Paulg2uk

    Celestion F12-X200

    Ok all retested this evening. My guitar signal can now be heard when set to 5kHz or slightly lower. And the distortion is still present. I've sent a reply to Celestion again letting them know. We shall see what they come back with.
  41. Paulg2uk

    Celestion F12-X200

    That's what I meant sorry. I'll retry again later tonight.
  42. Paulg2uk

    Celestion F12-X200

    I've just relaised I've totally messed up the that filter block experiment last night. I was really tired and didn't think about it till today while I'm at work. 5kHZ is gonna be 5000 Hz isn't it? Which is what I should be setting the gain control on the filter block to? I was setting it to like...
  43. Paulg2uk

    Celestion F12-X200

    Interesting. I will try that when I get in from work tonight and report back. Thanks Dave.
  44. Paulg2uk

    Celestion F12-X200

    Exactly what I thought! All I know is it's not the Axe, FM3, guitars or the power amps. My Red Sound FRFR's work perfectly so its not that either. Studio monitors work fine. Headphones and ear monitors as well all fine. It's gotta be the speaker it can't be anything else.
  45. Paulg2uk

    Celestion F12-X200

    Definitely nothing touching the cone I can see. I've tried several guitars both active and non active, checked the batteries and action etc and nothing raises suspicion. I'm still in contact with Celestion and they've asked me to do a test using the filter block on the axe with a low pass...
  46. Paulg2uk

    Celestion F12-X200

    Will do, managed to find out the original owners details just sent it to the guys at Zilla. Hopefully this will explain everything.
  47. Paulg2uk

    Celestion F12-X200

    Not yet! That's my next step. Although I've just had an email from the guys at Zilla saying something is definitely wrong and they are wondering if its one of their Celestion spec'd cabs or not. I'm trying to track down the original owner they might be able to find out from their records what...
  48. Paulg2uk

    Celestion F12-X200

    Hi guys, I hope you are all well. Managed to try my Zilla cab with my boogie head using the effects loop return with my FM3 and axe fx III. I’m still getting the same issue unfortunately. So it can’t be the power amp causing the problem. I’ve recorded the issue with my iPhone, I know it's not...
  49. Paulg2uk

    Celestion F12-X200

    This one could be pre Jan 2020 I suppose. What I don't get is why the speaker isn't distorting when I play an audio track through it. Only when my guitar is plugged into it. I think I'm gonna have to record what I'm hearing and upload it so you guys can check it out. I'm gigging over the weekend...
  50. Paulg2uk

    Celestion F12-X200

    Just checked and the screws are pretty tight. Worth a look though thank you.
  51. Paulg2uk

    Celestion F12-X200

    Interesting! I just had an email back from the guys at Zilla I asked them which wire connected to which terminal on the speaker. They said the black one is positive and the blue one is negative. I remember opening up the cab yesterday and the black cable wasn't on the positive terminal. they...
  52. Paulg2uk

    Celestion F12-X200

    That's very true, I've found a dealer over here in the UK that provide a 30 day returns period and a 2 year guarantee so its worth it. Either way I'll get my money back I suppose!
  53. Paulg2uk

    Celestion F12-X200

    That is true who knows what the seller was putting through it. That's not a bad idea actually. Why didn't I think of that lol. I don't normally do things like that but I think its worth a try definitely. Thanks for the idea!
  54. Paulg2uk

    Celestion F12-X200

    I didn't no it was in the Zilla cab when I bought it. Do I take the chance and buy another speaker? Or do I just call it day and sell the cab on? I'm not sure what to do to be honest. It's sort of put me off now.
  55. Paulg2uk

    Celestion F12-X200

    I doubt it considering I bought the cab 2nd hand. There isn't even a serial no on the back of the speaker. Do I take the chance and buy another speaker? There's a new one going for a decent price on Ebay at the moment. Or do I just call it day and sell the cab on? I'm still tempted to try the...
  56. Paulg2uk

    Celestion F12-X200

    Just tried it and surprise surprise the distortion is still there. So that proves it's not the power amp its gotta be the speaker.
  57. Paulg2uk

    Celestion F12-X200

    I haven't no. That's a good idea though. I'll also try that later tonight when I get in from work. Thanks for the recommendation.
  58. Paulg2uk

    Celestion F12-X200

    I've tried my 2 Music Man L3's which have the preamp inside of them. Also tried my LP and nothing changed you could still hear it.
  59. Paulg2uk

    Celestion F12-X200

    Tried that too power amp vol was up pretty loud and the axe's vol was set to low. As I mentioned though it all works with my studio monitors and my Red sound cabs. I know they have their own internal amp that powers them but it still works fine. I even tried an old Boogie cab I have with the...
  60. Paulg2uk

    Celestion F12-X200

    Thanks Rex I'll give it another go tonight when I get in from work.
  61. Paulg2uk

    Celestion F12-X200

    I have yes and all seem fine. It all works great through my studio monitors, headphones and my Red Sound MF10's. It was funny cause I was just testing my presets the other day with my ear monitors plugged into the Axe FX's headphone socket and I could't get off my main preset. I was happily...
  62. Paulg2uk

    Celestion F12-X200

    I have yes. First thing I tried when I heard the distorted sound. Then cables etc. You know the usual stuff before we finally panic! lol
  63. Paulg2uk

    Celestion F12-X200

    Lol I appreciate that thank you. I did get a reply from Celestion today saying I could be driving the power amp too much. I said I've tried to set the level of the power amp both set to really low and at gig volume and the you can still hear the distortion when set to both. They then replied...
  64. Paulg2uk

    Celestion F12-X200

    It's a Celestion spec'd cab made by the guys at Zilla which I bought from a seller on Reverb. The cab is in mint condition and looks like its hardly been used. The original seller never used it with a modeller but did use a power amp with it so I'm told and never had any issues. I'll open up the...
  65. Paulg2uk

    Celestion F12-X200

    Thanks Mike, I'm gonna open up the cab tonight anyway when I get in from work and just check everything and make sure its all in order. Thanks for all the help and recommendations fellas. Hopefully I can get this all sorted in the next few days.
  66. Paulg2uk

    Celestion F12-X200

    Thanks for sharing, that's interesting so you're using the PS170 and you get no issues at all. I don't get it! That would mean it's gotta be the speaker itself. What a headache! I'm gonna try another power amp first I think that's gonna be the easiest way to determine what's going on.
  67. Paulg2uk

    Celestion F12-X200

    Thanks for the info, I've sent Celestion an email hopefully they can shed some light on this. I get the feeling it is the power amp though. We shall see. I'm getting a forum member to test it for me on his rig with the PowerStage 200 (Thanks Tony). Let's hope its not the speaker. If it though...
  68. Paulg2uk

    Celestion F12-X200

    Thanks for checking for me! I was planning to buy a Matrix GT1000FX anyway so maybe its worked out for the best. I'm still going to find out about the Powerstage 200 just in case. I'll report back if I find out anything new.
  69. Paulg2uk

    Celestion F12-X200

    Thank you appreciate it! Fair point about driving the clean tone. I'm gonna message the other fourm member I know that has a PowerStage 200 and see if they will test with a clean tone for me and also see if they are getting any issues. Let's hope I haven't got a blown speaker!
  70. Paulg2uk

    Celestion F12-X200

    Just tried that Dave. It's still distorted at really low volume. I had the PowerStage hardly on and I could still hear it.
  71. Paulg2uk

    Celestion F12-X200

    I'm pretty sure the PowerStage 170 only does 85w at 8 ohms I seems to remember. But others on the forum have used the PowerStage 200 without any problems so I'm thinking that probably has just enough power to solve the problem. I'm sure the 200 is 100 watts plus at 8 ohms.
  72. Paulg2uk

    Celestion F12-X200

    I don't no, I have a couple of Red Sound MF10's and they work fine on the same output I've plugged the PowerStage into. And so do my studio monitors they work fine as well. Very strange don't you think?
  73. Paulg2uk

    Celestion F12-X200

    Hi guys, I hope you're all well. I managed to get a Zilla cab that's built to use with the F12 on Reverb for a really good price. It turned up today and I've plugged everything in and so far so good. I'm using it with a PowerStage 170. It sounds pretty good so far but I've noticed a little...
  74. Paulg2uk

    UPS customs charges UK

    I'm actally thinking about buying a Matrix cab and importing it from the US. Have you guys seen how much it its to send it via UPS? £139-00 I dread to think how much the import fees are on it lol
  75. Paulg2uk

    Do you have an Axe-Fx III and an FM3?

    I have both too. I usually use my Axe III for home use and some of the bigger gigs I play. Recently I was able to use my FM3 at a small gig along with the FC6 and have been quite happy using it for everything at the moment. I like the way I can load presets from one unit to the other, if it's...
  76. Paulg2uk

    Red Sound Elis8 FRFR Review and MF 10 Comparision

    +4db on both the Axe and the FM3.
  77. Paulg2uk

    Red Sound Elis8 FRFR Review and MF 10 Comparision

    Thanks Sash, I checked out a few of my presets and some were definitely not levelled correctly. in fact some of my clean, heavier and mid gain tones were set quite high and going into the red on the preset levelling meter quite a lot. I'm not sure how that happened. Probably me not checking them...
  78. Paulg2uk

    Red Sound Elis8 FRFR Review and MF 10 Comparision

    I think that might be the answer Sash to use them in stereo. I think I'll try my Elis 8s next time when I go to rehearsal. Where do you have your out level set on the FM3 or the Axe just out of interest? About half way or louder? I guess it really depends on the room itself. I find I have to...
  79. Paulg2uk

    Red Sound Elis8 FRFR Review and MF 10 Comparision

    Hi guys, I hope you are all good. Just checking something with you all. I finally had my first gig over the weekend after 18 month of not playing. I had my FM3 and one MF10 in mono connected to out 2 L on the FM3. I was just curious those that have started gigging again where about do you...
  80. Paulg2uk

    Shorter FASLINK cables

    I ended up buying one in a 50cm length but my FM3 and FC6 are pretty close together on my Temple board, and I have the cable routed underneath which has just enough length for me. 70cm should be enough to allow for both the FC12 and 6 I would've thought. I guess it just depends on how you have...
  81. Paulg2uk

    FM3 Firmware Version 4.00 beta 2

    Hi Bryant, Sure no worries at all. This is a backup from a couple of days ago so not my very recent backup. I've got a rehearsal tomorrow night so everything is pack up at the moment. I've not changed any system settings or anything like that. I'm on beta 3 and haven't had any issues with the...
  82. Paulg2uk

    FM3 Firmware Version 4.00 beta 2

    Thanks for confirming Bryant. No worries at all. I thought I was going crazy lol I did have another one I might have found as well. This one is to do with the delay block when exporting a preset from the Axe III and importing it to the FM3. I'm not sure if it's all the delays in there but it...
  83. Paulg2uk

    FM3 Firmware Version 4.00 beta 2

    Thanks Bryant, Appreciate it! As soon as I get in from work tonight I'll upload my system and FC file. Cheers Paul
  84. Paulg2uk

    FM3 Firmware Version 4.00 beta 2

    Hi guys, Lovin' beta 2 at the moment. I think I might have stumbled on a small bug in beta 2 using a stand in switch. I'm just checking in case it's a setting I've missed. I have the FM3 setup with the FC6 and I'm using the OMG9 layouts. I've connected a Mosky footswitch to the FC6's switch...
  85. Paulg2uk

    Let's see those FM3 rigs!

    Thanks Sukh, I'm using it for the first time tonight at rehearsals with one of the MF10's. Gotta remember to use Out 1 on the FM3 tonight as I'm trying 4.00b. I had my first Covid Vaccine on Monday and haven't been very well for the last couple of days. It's just completely tired me out...
  86. Paulg2uk

    SOLD Gear By Ceba Screen Protector Available For Sale In UK

    Hi guys, Just checking to see if anyone in the UK was after a Gear By Ceba Screen Protector for their FM3? I'm selling mine after going with the Zenrigs Zenguard system. It originally cost around £70 with shipping to the UK. Probably looking for £40 with postage but I'm ope to offers. Never...
  87. Paulg2uk

    Let's see those FM3 rigs!

    Thank you I appreciate it! I just drilled out the holes on the temple board a little so the connector fitted through and I bought some rubber grommets from Ebay and they clip themselves in. There's a very small gap in between the grommet and it's just big enough to fit the thickness of the...
  88. Paulg2uk

    Let's see those FM3 rigs!

    Hi guys, I hope you are all good. Update to my FM3 board. I decided to mount both the FM3 and FC6 together. I just figured it was easier to keep them both together. Swapped my FC12 with Sukh of Zenrigs for his FC6 and some extra Zenrig goodies. I have a separate FC6 board for my Axe III rig...
  89. Paulg2uk

    FC-12 vs FC-6 decision

    I've been thinking about this the last couple of days. I've had an FC12 since they started shipping and I've been using it with both my FM3 and Axe III. Towards the end of last year I ended up building an FC6 board and I've really been enjoying using it. You can do so much with just 6 switches...
  90. Paulg2uk

    Let's see those FM3 rigs!

    How's the Harley Benton power supply holding up? Looks really good for the price!
  91. Paulg2uk

    Toto - "Hold the Line" - Steve Lukather guitar solo cover

    Sure no probs! This is Bakerman's preset I just saved the pitch blocks to my library and put them in my own preset using my amp and cab etc.
  92. Paulg2uk

    Toto - "Hold the Line" - Steve Lukather guitar solo cover

    Thank you, that worked! sounds awesome. I knew I was missing something. I just converted the preset using Fractool.
  93. Paulg2uk

    Toto - "Hold the Line" - Steve Lukather guitar solo cover

    Hi guys, I hope you are all good. I had to learn the solo recently as my band decided to cover it. One of my favourite solo's that's for sure! I'm just checking to see if I've got the harmony section programmed correctly in the pitch block. Do you guys do the same? Or do you use a custom...
  94. Paulg2uk

    3U vs 4U rack for ax3 ?

    I ended up buying another one of those SKB fly racks. I had a 6u one where I had power conditioner, Axe III, and a Matrix power amp all hooked up. I decided to use the 6u rack for my mixer setup at home and went with a 4u one which has just my power conditioner and axe III in. That's all I need...
  95. Paulg2uk

    Wish FC/AFX3 integration for duel function buttons.

    Ok I gotcha now. Are we just talking one delay IA? or have you got other IA's you need to access on that particular layout? Can you not just use 2 scenes then? one with the delay set on and one set to be off? Or have you used them all already?
  96. Paulg2uk

    Wish FC/AFX3 integration for duel function buttons.

    Why would scenes not work to do that? You could then setup an IA for the delay block on a separate foot-switch?
  97. Paulg2uk

    FM3 and FC-12 Layout Editing Problem?

    No worries at all you're welcome. Glad it worked!
  98. Paulg2uk

    FM3 and FC-12 Layout Editing Problem?

    Sounds like it could be the issue to me. I'm not near my FM3 at the moment but you can select which layout you want to appear on each device. I think that might be in devices or setup in FM3 Edit I seem to remember.
  99. Paulg2uk

    FM3 and FC-12 Layout Editing Problem?

    If you're trying to edit the same layout associated with that switch it will show up on the FC12 as well as the FM3. Try setting a different layout to show on the FM3 and then set another different layout to show on your FC12. I have layout 8 showing on my FM3 and layout 2 showing on my FC6 or 12.
Top Bottom