• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. Galgenwald

    Axe Ultra + Voodoolab GCP Midi connection Problem

    Now as I see this, it sounds so easy, and i couldn't get it in my head by myself =)
  2. Galgenwald

    Axe Ultra + Voodoolab GCP Midi connection Problem

    Hello people. I have a little problem in my setup. My rack is built up like this: Line6 G90 Wireless Hughes & Kettner Grandmeister 36 Axe Ultra (Wired with 4 Cable Method) It is connected via MIDI to my VOODOOLAB GCP it is wired like this: GCP Midi OUT Axe Ultra Midi IN Axe Ultra MIDI...
  3. Galgenwald

    Ultra & Line 6 Relay G90 advice

    I use the g90 and the ulta for years now,.... try to set up different cable lentghs emulations on the g90 and refresh the batteries and it woks fine. I use MAIN OUT (XLR) on the G90 into the JACK REAR INPUT on the Ultra.
  4. Galgenwald

    I'm New.. Help...

    1: Download the Legacy Axe Edit Here 2: The Mbox works. 3: Yes you can do that. Guitar 1: Axe front in normal signal chain. Guitar 2:create an FX loop block in your patch and plug the guitar 2 into the fx return jack on the back. your patch should look like this to play with 2 guitars...
  5. Galgenwald

    Ultra with a GCP. Can I use 4 expression pedals?

    yep it does =) i go with 2 connected to the gcp where 1 is volume and the other is expression or wah depending on the preset =)
  6. Galgenwald

    Axe FX Standard / Ultra separate output signal for tuner??

    if your actual patch runs in row 2 on your patch, you can scroll down in the midi menu to check for volume 2 because right on the bottom (midi no 94) i found sth called: "Volume 2 Bypass" If i get it right, it means that you can bypass anything that is connected to the 2nd output in your patch...
  7. Galgenwald

    Axe FX Standard / Ultra separate output signal for tuner??

    why dont you just assign the button on the line 6 to activate both tuners? the Tuner in the Axe Fx (which actually mutes the main outputs) and the tuner in the line 6 just to tune? Like this you dont have to mes with the input or output volumes,.... just 1 button, 2 tuners... (1 to tune and...
  8. Galgenwald

    Axe FX Standard / Ultra separate output signal for tuner??

    To do this: Turn "ON" your Axe FX Ultra Select any Patch you want Hit the "I/O Button" Go 4 Pages to the right. Now you are in the CTRL configuration, where you can check and assign the controller numbers. in my Axe Fx Ultra, Output 1 Volume is "Contoller number 11"
  9. Galgenwald

    Axe FX Standard / Ultra separate output signal for tuner??

    Do you use your line 6 Device in 4CB? then there isnt i guess. If you use your Line 6 just as a Midi board to switch your axe, then its pretty simple. take your patch as you are used too, BUT create an FX Loop Block in another row. Actual Patch: Now, Insert an FX Loop Block in a...
  10. Galgenwald

    Ultra for effects only

    did you check that the in and output volumes on the front are not clipping or sth? do you have a cab and an amp loaded in your patch?
  11. Galgenwald

    Lil studio related question of the ultra

    I have now the time to try out the settings we talked about ETOLKIEN. When I want to increase the volume of the DI Track, do i simply turn up the level on control 4 on the fx loop block settings, as the fx block is in row 4?
  12. Galgenwald

    Ultra for effects only

    there are effects, you should use before the input of your amp, also others that should ONLY be used in the fx loop of your amp. In front: Guitar => Fuzz => Buffer/LineDriver => WahWah => Compressor => Distortion/Overdrive => Amp In the Loop: Send =>Pitch Shift => Modulation >= Delay => Reverb...
  13. Galgenwald

    Can the Ultra Get close to the II??

    I'm totally okay with you!!! I feel the same!
  14. Galgenwald

    Post your rigs!!

    Yep me too. but I was there to talk about how it works in a rack. But I have another short clip of me playing on my facebook page. Lets see If i can make it embed in my post.
  15. Galgenwald

    Schaffer Replica Pedal on a AXE-FX Standard

    In theory it should work liks this. I know the sound of the peadl but i never tried to recreate it. A general good advice for working with Fractal Audio stuff is: "Go what sounds best for your ears." Because especially when you are new to it, you can easily be overrun by all the stuff these...
  16. Galgenwald

    Post your rigs!!

    I know this thread has bin inactive for a moment, bu I will share my rig aswell with you =) What we see: Adam Hall Power Splitter Line 6 Relay G90 Wireless Hughes&Kettner GrandMeister 36 Fractal Audio Axe FX Ultra Ofc wired in 4CBM and It's all controlled via: the Voodoolab GCP (labels by...
  17. Galgenwald

    I just want to use my AXE-FX standard as a Flanger pedal with my 5150

    Well in the beginning I thought so too. to print it out and keep it somewhere. But after you hooked it up 3-4 times. it gets logical and the "understanding" comes moire and more of what you are actually doing. It is useful to take different colors to wire it all up. so in case you are looking...
  18. Galgenwald

    What's the easiest way to set this up?

    So? did it work out? I am using an ultra together with a 18i8 scarlett and 2 JBL monitors and it works very well
  19. Galgenwald

    I just want to use my AXE-FX standard as a Flanger pedal with my 5150

    What you want to do is using the 4CBM Meaning you will be able to place effects in front of the PV preamp and after. Effects before the amp are usually Fuzz--Buffer/Line Driver-- Wah--Compressor--Dist/Overdrive AMP Effects in the FX LOOP are usually Pitch Shifter--Modulation--Delay--Reverb...
  20. Galgenwald

    Lil studio related question of the ultra

    Yep. I got it so far. with the original setup you get only mono tracks. Which is kinda sad if you want to use some stereo effects on lead sounds or synth sounds etc. When I tried it, I will try to post a sound demo if I dont forget it =)
  21. Galgenwald

    Lil studio related question of the ultra

    Sounds awesome. Nice to know, that it doesnt make any difference if you palce it in front or in a seperate row. I mostly do not use a cab for recording. in 90% of the cases I go with the Bogner IR by Ownhammer loaded in LeCab 2 in my DAW
  22. Galgenwald

    Lil studio related question of the ultra

    Ahhhhh. I already looked in the axe wiki but I didnt find the article. So If I got it right, It should look like this: In the patch I use an Fx Loop Block BEFORE the signal chain to get the wet track. and on the back of the axe i use the Output 1 as the wet output and the output 2 as the...
  23. Galgenwald

    Lil studio related question of the ultra

    Hey guys,... As I read the axe 2 always provides a dry DI track with it while recording. I was asking myself if the gen 1 Ultra can also do this. For the moment to track DI tracks as well I plugin my guitar into a Palmer BLue Di box and from there goes 1 output into my soundcard and one into my...
  24. Galgenwald

    Is Ultra/Std still worth it ?

    So what we dcan actually say is: the gen 1 units are stil absolutely worth it. I dont know for how much they go in oversea but in germany you find some standarts for around 800€ and the ultras for about 1.2k I bought my Ultra 2 years ago with a 3unit rack for 1.1k€ and I am very happy with it. I...
  25. Galgenwald

    Help newbie question!

    the gen 1 axe edit supports drag and drop already. otherwise it would be a pain in the a.. to do this =)
  26. Galgenwald

    Cab Lab 3 with Axefx Ultra?

    It tells me :"INPUT FILE IS NOT A REGONIZED .WAY FORMAT" Do you know what to do?
  27. Galgenwald

    Cab Lab 3 with Axefx Ultra?

    this tool looks IMMENSE: you can even convert axe 2 irs into axe 1es.... i have to try it as soon as i get home!!!!!
  28. Galgenwald

    Cab Lab 3 with Axefx Ultra?

    well is there any posibility to convert existing .wav ir files into gen 1 .syx then? i did not find any other converter on the net. :( to store them in my axe to take em with me
  29. Galgenwald

    Cab Lab 3 with Axefx Ultra?

    Hello Paranoid. Does this mean, that the plugin version of the CL3 is able to convert .wav IR files into .syx files that can be read by the ultra unit? Meaning that I can be able to store them in my user cab library in the unit, or does it mean that i can only use the created IRs only inside my...
  30. Galgenwald

    Where to put a Looper in the effects chain?

    Well,... you already made a wiring fault in what you mentioned above. I just tried it out on my ultra and it worked well =) listen: Take your Looper, plug it in as I mentioned above. Axe Send -- Loop In --- Loop Out ---Axe Return Then you go creating your patches like this. Make sure you...
  31. Galgenwald

    Where to put a Looper in the effects chain?

    Well hello, When I understand it corectly what you want to do is: using an external loop device together with your axe fx. to record sound A and overdub with Sound B and play along with Sound C. If this is the case, I might be able to help you. If not, I'm sorry. At first make sure what you...
  32. Galgenwald

    Axe Fx Cab Sims

    Thanks for your advice. I already thought that it wouldnt work. That is possibly the reason why i didnt find anything about this kind of setup in the net. And of course I didnt try it so far. I know about those load boxes. There are some from Palmer which are pretty cool. (we used them on the...
  33. Galgenwald

    Axe Fx Cab Sims

    what i basically ment is: Amp (speaker out) ----> Axe Fx Ultra (in) (preset with cab/mic only) -----> Interface ---> DAW I have several heads to try actually. but most likely i would go with the Bogner Shiva 20Anniversary, a Bogner Alchemist and a Fender Jazz Chorus
  34. Galgenwald

    Axe Fx Cab Sims

    Hey people, It might sound wierd for you but I just got a wierd idea in my head. ... can i plug the " amp out" of a tube head into the axe and make a ropeset just to use the cabs and the mics of the FA unit??
  35. Galgenwald

    With the Chorus, Flanger, Delay & Phaser - what "types" are they?

    wiki.fractalaudio.com/gen1/index.php?title=Delay
  36. Galgenwald

    With the Chorus, Flanger, Delay & Phaser - what "types" are they?

    oh damm I need one more post to answer with an url
  37. Galgenwald

    With the Chorus, Flanger, Delay & Phaser - what "types" are they?

    as far as I can say something about that, this should definately satisfy your need of knowledge =)
  38. Galgenwald

    GCP is turning effects on and off but won't change patches?

    make sure that ur gcp is running in "4preset" mode. meaning that you have 4 presets per bank and 8 Instant Access controll buttons where you can assign them to turn effects on and off. Like I would have it on my normal pedalboard. I did it like this and it works just fine.
  39. Galgenwald

    I/O CTRL - Ground Control Pro - Help please.

    Well in Fact. I did it with my ultra and my gcp in another way. there the gcp is running in a 4preset 8 IA mode.
  40. Galgenwald

    Axe Ultra which Poweramp? (except Matrix)

    I chose the Omnitronix EDP 1000 and im running it into a Palmer 2x12 V30 cab. I'm really happy with the result. It doesnt colour at all.... I can really recommend this setup. But im using an axe ultra FW 11. I dont know how it sounds through an axe 2
  41. Galgenwald

    Getting Up And Running With A Standard.

    I'm using a Focusrite Scarlett 18i8 and it works really nice witht eh axe and the axe edit. The Axe Edit I downloaded here: axefx.fr
  42. Galgenwald

    Axe Ultra which Poweramp? (except Matrix)

    Its just a price question at the moment. I think one day I will go with the matrix one.
  43. Galgenwald

    Axe Ultra which Poweramp? (except Matrix)

    Hello people, I'm owning a FA Axe Ultra and I would like to use it with a Poweramop into my guitar cabinet. I know I have to turn off the Cab simulation. Now My question. Do you have experience with some Poweramps to use with? I 'm not searching for a tube poweramp. what I'm...
  44. Galgenwald

    4 Cable Method Axe Ultra + Framus Dragon

    Hello people, you might perhaps help me, because i'm dealing with an issue that cannot be solved by me myself and I =)... I will try to explain you my problem: I'm owning a Fractal Audio Axe Fx Ultra and a Framus Dragon. The axe alone is working well. As well as the dragon. I would like...
Top Bottom