Recent content by trueresource

  1. trueresource

    Axe-Fx III Firmware 28.02 Release

    After installing fw28.02 my preset "387_MountSmokeyJazz" dBu level rose by 5 and tone added treble. This was correctable by lowering the vol level. However my preset "389_DominionPmprPtrc20RvGnP2" cpu had an cpu overload warning. I did not take the time to investigate volume changes in either...
  2. trueresource

    non fractal foot controller assist needed

    Thank you gentlemen. When I got to church I had no time to check your comments, so from memory these were the mods: pedal from fc1 to pedal1, midi ch 1, display offset 1, send realtime syex on, program change on, send mdi pc chan 1, and everything worked perfectly! let me know if anything above...
  3. trueresource

    non fractal foot controller assist needed

    got it, thx rodzimguitar68
  4. trueresource

    non fractal foot controller assist needed

    Thanks Unix-Guy. Im glad you clarified the difference between CC and PC as it looks like I was on the wrong path. Ive studied page 47 on the axe fx manual. With that will hopefully map the 5 button foot controller to the first 5 presets. You are great help!
  5. trueresource

    non fractal foot controller assist needed

    Thanks for your response. Ive never used midi commands and dont recall how I got this foot controller working many years ago. I do recall that my setup required me to place all 5 presets at position 1 thru 5 and set fx to starting preset 1. Because of your response ive watched a video describing...
  6. trueresource

    non fractal foot controller assist needed

    I must send my FC6 to fractal for service, so must setup my original non fractal foot controller (Tech21 midi mongoose). I have not understood what the manual is saying about this. im using the midi input. ive placed 5 presets in the first 5 preset positions and set starting presets in global to...
  7. trueresource

    no headphone output even though all out meters respond when strumimg

    Follow up: After factory reset and reinstalling firmware 25 and 27 didnt fix, but rather axe edit no longer connected. Things went from bad to worst. On a hunch I openned unit. Found flat cable to hedphone jack had become unseated. That fixed headphone but not axe edit. Finally I reaseated all...
  8. trueresource

    no headphone output even though all out meters respond when strumimg

    I would like to downgrade to firmware 25 just to see if it fixes. Anyone know how to locate lower firmware versions?
  9. trueresource

    no headphone output even though all out meters respond when strumimg

    yep
  10. trueresource

    no headphone output even though all out meters respond when strumimg

    After upgrading to firmware 27 I gigged with no trouble on the weekend. 2 days later Im getting no headphone guitar or usb music output even though all out meters respond when strumimg. Ive check cables. Can anyone assist?
  11. trueresource

    Error writing data to sound driver. No device driver (Error MM:6)

    Every since moving from Windows10 to Windows11, I get this error while playing mp3 music thru my Fx3. Music goes silent about 30 seconds before error apears. The only fix Ive seen on the web is to reinstall sound driver, which Ive done. Somewhere I read, this is a known problem with Windows11. I...
  12. trueresource

    a Christmas gift the community: Perfected Tuning offsets

    Sorry, I don't use 7 strings, so not familiar with an offset.
  13. trueresource

    a Christmas gift the community: Perfected Tuning offsets

    I have updated these offsets for the Axe3: Using OPEN strings, not harmonics, EADGBE = -12.6,-11.05,-9.2,-7.15,-5.15,-2.2. NOTE if you are NOT a fractal user you should use the James Taylor tuning with the G modification -12,-10,-8,mod(-7.5),-6,-3 using 12th fret harmonic tuning. This is a...
  14. trueresource

    Axe-Fx III Firmware 26.00 Release

    I had to revert back to firmware 25, as 26 caused edit modifiers to not exist. For example, when I click my volume block, the edit modifier to change the pedal parameters no longer allowed access to he parameters. In fact the yellow dot that appears on all modiers, no longer appeared in any...
  15. trueresource

    Replicate to eliminate tone/volume knobs on guitar?

    I turn all tone/vol to 100 on guitar, max out my output knobs on the fx3, set all block levels to 0. input blocks at -32 for humbuckers, input for piezo -17. Only use amp Master volume and Geq equalization and level to set my levels. This gives me quite satisfactory performance. I never use...
See more
Back
Top Bottom