Recent content by AXBX

  1. A

    Level Drop in ULTRA

    @JasonE : I think its global, as it does not matter which blocks are active, I would say... I found a more or less overriding gate in the Layout - page 3 called GATE, WHICH IS NOT PART of the effect blocks. I am testing it and seems fine. Is there another more global or overriding location...
  2. A

    Level Drop in ULTRA

    Dear Forum, The input level drops significantly during the ringing out of the guitar at a certain point. I first thought, it could be a gate, but the sound is still there, just with a lower level.... It sounds like a leap of around 3dB I would say not being continuously.. How to fix?? You can...
  3. A

    Passive / Active Acoustic Mic into AXE III

    How to set up a mic´ed acoustic guitar with the AXE III, no mixer involved. I prefer condensers, but would take the dynamic route either, in case. Plus, I sing into a second mic. The whole thing should be recorded digitally with the USB interface options
  4. A

    Signal Characteristics

    recording my amp
  5. A

    Signal Characteristics

    Dear Forum, I heard you can´t use the XLR from a DI Box into the AXES INs ?? THX BX
  6. A

    Vai 2023 Setup

    @sprint: Good point
  7. A

    Vai 2023 Setup

    The thing is, if you would add latency somewhere(!) in the chain, it does not really matter if your pre amp is 0 ms for tone shaping and feel, I would assume. Key question is, how the Rig would achieve a 0ms signal through the signal path as some modulation FX traditionally are run in series...
  8. A

    Vai 2023 Setup

    I see. Now: What´s the reason for Steve using a mono analogue pre amp in a hybrid (latency inducing) digitalized stereo setup ?
  9. A

    Vai 2023 Setup

    thx for your reply: So is there a chance for a analogue 0 latency setup only using fx blocks (or at least lower latency values), when in series with the AXE? Does the AXE allow a 0 Latency slaving through of the synergy signal (Maybe in parallel, merely adding the FX)
  10. A

    Vai 2023 Setup

    Dear Forum, These insights for a hybrid live rig are cool : Now How is the signal chain run in detail? Is it 4CM or Instrument input at the AXE III? Main aspect is how to achieve a 0 Latency Setup with the synergys. Is that possible at all here? I guess you need a 100% Wet Signal if using...
  11. A

    3 mono Signals on OUTs: 1Dry, 2no Cab, 3Full preset Sound

    Dear Forum, my intention is to print those 3 mono streams into a DAW. How to setup on the ULTRA? THX
  12. A

    USB Audio Center

    ...running stable, low buffer settings in sync, plug and play, drivers? :). I don´t know. But tend to record/monitor through UAD and use the AXE III later for re-amping the DI Signal at the moment. Seems to be the safest way, so far... OR As there is no chance tranferring the DI and monitoring...
  13. A

    USB Audio Center

    Great Andrew. The UAD stays, as I need Vocal recordings. it was my fault to see that the AXE does not work as a dedicated Audio Interface for the mic department plus I learned it is fixed to 48kHz. Okay. But we are getting there... Would you see a chance in recording the DI signal through the...
  14. A

    0 latency monitoring an additional external line signal

    ah, okay. THX!
  15. A

    0 latency monitoring an additional external line signal

    what is the highest sample rate you get out of the axe?
See more
Back
Top Bottom