Recent content by Luca9583

  1. L

    Triple Axe-Fx III rack (now with demo)

    Audio in the video is mono. Was it meant to be stereo?
  2. L

    Input 1 gate vs using a Decimator.

    Exactly. Running line level and not into Input 1 would make sense here. There seems to be some confusion in this thread re @joesatch's setup. Assuming the gain staging is consistent when either the ISP and/or the Axe are added in line after the rack preamp, then both the ISP and the Axe III...
  3. L

    Input 1 gate vs using a Decimator.

    Try the Axe's gate in Classic mode instead and see if that gives you a better response. Is the goal to gate the post preamp signal of the high gain preamp to then process in the Axe III for post preamp fx and Cab modelling? Or are you trying to use the Axe just for the gating? I find that for...
  4. L

    Wish Pitch block: open tunings

    Once you've got a hex pickup installed on the guitar, this would simply require a future Fractal product to have.. a 13 Pin input capability in addition to the current I/O, plus 6 instances of the Tone Match block to model various guitars and pickup positions per string, and 6 instances of the...
  5. L

    Synth block tracking

    Yep.
  6. L

    Synth block tracking

    Yep. Another workaround instead of feeding the Synth Block a Pitch Block octave up signal is to split the bass singal before it hits the Axe and run one split into a bass whammy set one octave up and then feed that to the Synth block (set one octave down) via one input on the Axe, and the other...
  7. L

    Looking for a small hardware unit that can replicate the Axe's envelope controlleri

    Hi all I'm looking for a small hardware unit that can replcate the Axe's envelope controller. I'd like to expand the Axe's envelope control by running external audio sources as extra envelope controllers into the expression pedal inputs. I've tried the Copilot Autodialer but need something...
  8. L

    Wish Ability to control Virtual Capo semitone steps up/down with external foot switch

    You should be able to control the semitone values of Virtual Capo via midi CC using an external Midi controller. You could programme an RJM Mastermind GT or LT to do this..you would just need to work out what the corresponding CC values are for each semitone by testing every CC value out and...
  9. L

    Hi Rusty. Sorry i'm no longer selling the Switchblade 8F as i've changed my setup.

    Hi Rusty. Sorry i'm no longer selling the Switchblade 8F as i've changed my setup.
    • Luca9583
    • Profile post comment
  10. L

    How about a fractal light ?

    I would love to see a modular Fractal pedal that could function either on it's own or as an additional piece to add more fx blocks to existing Fractal devices (eg for those who want more Pitch blocks etc). No Amp or Cab blocks, just all the Fractal effects. It would be awesome if you could...
  11. L

    IEM Sound Shaping

    Are you able to record your IEM mix so you can compare the way that mix sounds on your studio monitors vs the Axe direct into the studio monitors? Also have you compared your IEM earbuds with a good pair of headphones, both running from the IEM transmitter? Regardless of whether your IEMs...
  12. L

    Will running the axe before a tube amp be ''better'' for tone than running in FX loop?

    The only way to find out if you hear or feel a difference is by testing the Axe III in 4CM and recording the results. Once just the amp, once just Axe in the front, once just Axe in the back, and once in 4CM, paying close attention to the gain staging with each connection. I would say that the...
  13. L

    Wish Modifier list & menus: show block & parameter

    +1
  14. L

    Wish Pickup modeling

    Yep exactly, and both of these work best if you feed them a piezo signal. As mentioned above the best way to do pickup modelling (and pickup position modelling) is with a polyphonic pickup and a VG-99, SY-1000, Line 6 Variax, Autotune For Guitar or similar. If you listen closely to both the...
  15. L

    250$ for Metallica Black Album Preset

    Exactly. @MrBurns666 if you want the exact sound, either use the Tone Match block after your Amp block without any Cab block at all or if this is just for recording, record your raw Amp block sound without any Cab block, and then use Fab Filter's Pro Q in Match Eq mode. Avoiding any kind of...
See more
Back
Top Bottom