Looks pretty similar to the first beta
These are the changes / additions in the Release Notes in between Beta 1 and Beta #2
AMP BLOCK UPDATES
New “Deluxe 6G3” amp model based on the bright channel of a 6G4 “Brownface” Deluxe.
Improved Phase Inverter modeling. Went through every model with a fine-toothed comb and adjusted power
amp and phase inverter parameters as needed to reflect new modeling.
EFFECT MODELS
New “Citrus Juicer” in the Compressor block, based on the Dan Armstrong Orange Squeezer™
. The original pedal has a single knob, but the model adds additional parameters for extended flexibility. On the original,
the ratio and threshold vary with the specific components used and the internal bias trim. As a starting
point, set Threshold to –26.0 dB and Compression to 8.0, then adjust to taste. The new Half-Wave detector
type used by this model is also available for other compressor types, offering different attack and release
behavior and a slightly grittier character.
PITCH SHIFTER UPDATES
Improved tracking in the Pitch block, now aligned with Axe-Fx 31.03. This results in better performance for
Virtual Capo and other types. The Tracking mode supports NOTES and CHORDS, providing optimized
detection for each. The Tracking Adjust parameter has been removed, as this behavior is now handled
automatically.
OTHER UPDATES
Improved Auto-Swell type in Volume block. The new algorithm features a dynamic threshold which tracks
the average level of the input signal. The Hysteresis control determines how much the short-term level must
drop below the average level to reset the gate. The Threshold control determines the absolute threshold at
which the gate will close.
Improved Envelope Follower in Megatap, Multitap and Plex blocks.
On the FM3 Mark II, changed the mini LCD contrast function to allow finer control over a more usable range.
Improved “Dwell” in the Spring reverbs.
FIXES
Changed default mini-LCD contrast setting to 50% for FM3 Mark II types.
Corrected MIDI CC control from Pedal 1 and Pedal 2 not working in firmware version 11.0.
Fixed a gain issue in the Wah block.
Fixed Amp block first stage bias point can get corrupted and produce unwanted distortion.
Fixed some parameters can't return to exactly 0.0 with knob control after going to min or max.
Fixed wrong Preamp Hardness being loaded for amp models with pentode preamps (i.e., AC-20 EF86).
Fixed wrong time constant in Herbie models (not significantly audible).
Various fixes
