FM3 Firmware Version 12.0 public beta

Status
Not open for further replies.
I'm having the red block mute/crash thing, too. I've been building a new preset and randomly I'll loose volume and about half-way into my grid, the block meters turn red. If I change to any other preset, there will be some point that the blocks mute, too, even on a blank preset with just In1 and Out1, with Out1 being red.


1.jpg2.jpg
 
Poparad said:
I'm having the red block mute/crash thing, too. I've been building a new preset and randomly I'll loose volume and about half-way into my grid, the block meters turn red. If I change to any other preset, there will be some point that the blocks mute, too, even on a blank preset with just In1 and Out1, with Out1 being red.


View attachment 162916View attachment 162917
Click to expand...
Once a crash happens you pretty much need a reboot to get back to normal.

In the first preset, what block is the first one with all red?
 
kocher said:
Did a new preset using quick build from the editor. Very simple setup: in -> drive -> amp -> cab -> reverb -> out

There was no sound coming through. Changed amp model to something else and sound was coming out of the speakers. then switched back to the 2204 and everything worked as it should.
Click to expand...
i was also building a preset from scratch I'll try again
 
Installation went as smooth as it gets. Going to use this on my band's gig this weekend. Thanks FAS team.
 
Poparad said:
I'm having the red block mute/crash thing, too. I've been building a new preset and randomly I'll loose volume and about half-way into my grid, the block meters turn red. If I change to any other preset, there will be some point that the blocks mute, too, even on a blank preset with just In1 and Out1, with Out1 being red.


View attachment 162916View attachment 162917
Click to expand...
yes that's the same i was getting and i was also creating a patch from scratch if it could help
 
Poparad said:
Yeah, just crashed for the 3rd time for me. The first block is the pitch block, set to an octave divider.
Click to expand...
You mean the third Block in the Chain. Manipulating the preset, scenes etc I have not had a crash. Im using the turbo version of the FM3
 

Attachments

  • Screen Shot 2025-11-29 at 07.16.10.png
    Screen Shot 2025-11-29 at 07.16.10.png
    373.7 KB · Views: 24
Hey, guys, I have to report abnormal behaviour of EXTernal controller mapped to PEDAL2 (EXP/SW Tip), physically toe switch of EP-1 used for toggling Volume/Wah blocks states again. That very same thing happened to me between 11.01b to 11.02b (I didn't update to regular 11 because of Tuner heel down problem). I am unable to toggle anymore again, function stuck on WAH enabled, switch doesn't work - double checked the settings, nothing found. Reverted back to 11.01b1, but it keeps stuck, so was not able to successfully revert the feature back. Well - what next? Back to 10, then 11.01b1?

EDIT - after 2hours or insatalling different FW (12b, 11.01b, 11.02b, 10) with poor results (WAH stuck ON), regular FW11 worked fine regarding EXT controllers.
 
Last edited:
nicolasrivera said:
You mean the third Block in the Chain. Manipulating the preset, scenes etc I have not had a crash. Im using the turbo version of the FM3
Click to expand...
I meant the third time as it happened on three separate occasions. I'm not on the turbo version, so maybe I'm hitting some kind of CPU spike issue, even though my average CPU usage for that patch is in the low 70s.
 
Status
Not open for further replies.
Back
Top Bottom