Hamsworld
Inspired
My current favorite combo is:
Factory 2: F165 [2x12 Zilla Cream H 57 1 ML]
+
Legacy: F166 [4x12 Rumble L 121 A]
Sounds close to my real cab with an EVM 12-L and Celestion G12-150.
Low or High Cut?
My current favorite combo is:
Factory 2: F165 [2x12 Zilla Cream H 57 1 ML]
+
Legacy: F166 [4x12 Rumble L 121 A]
Sounds close to my real cab with an EVM 12-L and Celestion G12-150.
Low or High Cut?
Quick question.... if I Cut Lows and Highs in the Output 1-2 Global EQ why do I still have to make Cuts in the Cab Block ? I’ve noticed at our shows, at large venues, with crazy subs I have to cut them in both places .....
The Cab block uses a hi and low pass filter; it literally cuts off frequencies above and below a set point. Whereas cutting frequencies with the Output EQ merely reduces their level by up to 12 dB; it doesn't actually remove them.
What he means is that the Graphic EQ are not lowpass/highpass like the filters in the cab block. No filter is a hard cutoff, it's mathematically impossible (infinite order).The high- and low- pass filters aren't a hard cutoff either. They reduce the level by 6, 12, 18 or 24dB per octave.
Yes, that's pre-EQ.I always activate the "cut" switch in the amp block. Is that different from a low cut?