level

  1. D

    Scene leveling on the unit

    Is there a way to manage the scene leveling directly on the unit similar to the way possible with FM3-Edit (as shown in at 18:20)? During rehearsals I would often like to chane the scene levels and I have no FM3-Edit there.
  2. fannar182

    Input 1 gain - PRS Custom 22 - levels?

    Hi Fractal Forum, I have the Axe FX III and I'm playing through my PRS Custom 22. I'm going through a Shure SLXD wireless system (SLXD 1 and SLXD 4) and then to my amp. My problem is that I feel my signal is 'pushing' the Axe FX III to much, every preset I play through sounds 'dirty' and the...
  3. S

    Scene Levels

    I use scene levels (in the output block) for leveling out all of my scenes within a preset. I have been using Axe-Edit III for this. However, sometimes while playing out, for whatever reason a particular scene may need a small tweak. I can not find how to adjust the scene levels from the front...
  4. P

    Output level difference between USB5/6 and USB3/4

    I tried to use some VST plugins in DAW in real time with AxeFx3 as interface and noticed that dry signal level (USB5/6) is lower than with other interface. I created a small preset in AxeFx3 that has only Input 1-> Output2 blocks to send same 'clean' signal to USB 3/4 to DAW and this signal is...
  5. S

    output 1 block showing +10db on bypass preset 383

    Hi all, I'm a bit of a noob and a bit confused with what the appropriate level to come out from the input 1 block should be. So I had my guitar plugged into input 1, going straight to output 1 (using the "Bypass" preset 383) and have noticed the output 1 block meters in axe edit are going way...
  6. h.c.e.

    Is there an equivalent of "USB Return Level" on the III?

    Sorry if this has been covered before, I've exhaustively searched the manual, and did a search around the forum first, but... Is there an equivalent on the III to the II's "USB RETURN LEVEL" parameter? I use my AxeFX with headphones and I'd rather not constantly chase the individual app audio...
  7. S

    Output 1 makes the mixer distort (turn red)

    So I understand that tru 0 on the AX8 is when output 1 is turned all the way up. My problem is, that if I do that. The mixer in our band get´s so much input that the level control on the mixer only can be turned up to where it starts putting out audio to the PA. And even then it´s blinking...
  8. L

    Question about OUT on AX8 (+4dBu vs -10dbV)

    Hello, Just purchased a AX8. I want to set it up the right way so im going over the manual and i noticed that you have the option to set the nominal level to either +4dbu or -10dbV. Im connecting my fractal to my Universal Audio Apollo interface into my studio monitors and I dont know...
  9. Hurdy Gurdy Man

    AX8 input level problem

    Hi there, I have problems setting up the AX8 with my Hurdy gurdy (for those who don't know that instrument, it's something like a mechanical violin with a wheel ;-)). The gurdy has a piezo pickup system (similar to a violin bridge pickup) that played very well with other effect processors like...
  10. JoeHans

    Saving the metronome volume level?

    Hi guys, Does anyone know why the metronome level reverts back to -20dB after reboot? I have my tempo settings setup per presets but saving does not seem to include the metronome level.
Back
Top Bottom