We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Tags

humbuster

J
Troubleshooting my Petrucci Stereo Rig

Hey guys! Long time lurker, first time poster here. Over the last couple years, I’ve put together my forever studio rig inspired by Petrucci’s last few rig rundowns. I’m currently running two JP-2C’s with an Axe FX III in their FXL’s (7 Cable Method, 2 humbusters in appropriate positions in...
- Jesse Orion
- Thread
- Jan 8, 2024
- axe 3 hum humbuster jp-2c mimiq
- Replies: 15
- Forum: Rigs and Routing
S
AFIII Axe FX3 lot of noise and ground problem :( help!

Hi! unfortunately i have pretty bad grounding at home. I have already bought furman, new instrument cables, etc. Do you think that putting humbuster cables between the fx3 and the interface would help my problem? or some other tip maybe? Thanks.
- szabokevinke
- Thread
- Apr 19, 2021
- axe fx iii noise ground humbuster humbuster cable noise gate
- Replies: 15
- Forum: Fractal Recordings
New BTPA Composite Cable for Fractal Audio Systems Devices

Now offering, Composite Cables designed for Fractal Audio Systems products! These feature (2) Humbuster Cables, (1) Instrument Cable, (1) TRS/MIDI Cable, and (1) AC power cable all in one overall PVC outer jacket. Similar to a cable loom, except the outer jacket is PVC - like a typical audio...
- BTPA_USA
- Thread
- Nov 25, 2020
- 4cm humbuster loom
- Replies: 0
- Forum: Rigs and Routing
Does the Axe-Fx III come with a Humbuster cable?

...Or do I need to purchase one as well as the unit? Thanks!
- Xenoprimate
- Thread
- May 31, 2020
- humbuster humbuster cable
- Replies: 6
- Forum: Axe-Fx III Discussion
D
Humbuster 1/4" Out vs XLR Outs

Is there any tonal difference? If one tonally preferred over the other? Or is this just to reduce the noise flow of the output?
- DFauvre
- Thread
- May 23, 2020
- humbuster
- Replies: 2
- Forum: Axe-Fx III Discussion
Use Humbuster cables as regular instrument cables?

Hi all, I have recently sold my AX8 and wondering if I could use the my existing humbuster cables as a regular guitar cable without any side effects. I intend to have this plugged from my pedals to my amp or mixing board. I was told that the signal may be weakened due to the TRS jack on one...
- Prorenzo
- Thread
- Dec 27, 2019
- humbuster humbuster cable
- Replies: 3
- Forum: Rigs and Routing
B
Axe FX III cables and connections for using the effects in a recording studio environment

Hi all I am adding an Axe III to replace my Axe 2 in my home studio and currently planning my connections with my multi in and out mixer set up. I notice there are a lot more outputs and inputs on the Axe 3 but the extra outs and ins are mainly explained in the manual to be used as connections...
- bukman
- Thread
- Jul 1, 2019
- axefx3 humbuster output 3 and 4 recording send effects
- Replies: 1
- Forum: Axe-Fx III Discussion
A
Humbuster and Rack Panel Use

How would I incorporate a Humbuster cable in a rack panel setup. Should just the cable going to the panel be TRS to TS? Should the cable coming out of the panel to the DI (in my case) also be Humbuster wired? Will this not work at all? Thanks!
- AlexanderJ
- Thread
- Sep 5, 2018
- humbuster infrequently asked question wiring
- Replies: 3
- Forum: Axe-Fx III Discussion
Need to Use Humbuster Cables with Rack Effects?

Sorry if this is common knowledge, but I searched the thread... I want to integrate a rack effects box (specifically, an Eventide H7600) into my AxeIII. So, the signal chain would be: Guitar >> AxeIII >> H7600 (from the AxeIII's output 3) >> AxeIII (in the AxeIII's input 3) Would there...
- Shaw
- Thread
- Aug 13, 2018
- external fx loop humbuster rack effects
- Replies: 3
- Forum: Axe-Fx III Discussion
Question about using humbuster cables in a pedal board

Thinking ahead to some distant point in the future; I think I know the answer, but thought I would ask anyway. If I mount the AX8 in a pedal board, and run quarter inch cables to jacks mounted on the side of the pedal board, and then run quarter inch cables from those jacks to the power amp...
- David Houck
- Thread
- Mar 15, 2018
- humbuster
- Replies: 2
- Forum: AX8 Discussion
Humbuster cable direction?

Folks - I decided to replace my regular TS/TS cables with Humbusters, so I ordered a pair from Best Tronics. Does it matter whether the TRS or TS gets plugged into the Axe-Fx II? I'm running these from OUTPUT 2 to my CLR's. Thanks!
- plyall
- Thread
- May 2, 2016
- humbuster
- Replies: 6
- Forum: Rigs and Routing
G
Humbuster cables with Line6 or other?

Just curious... Has anyone tried the humbuster cables with other multi-FX boxes? Sometehing like Line 6 M5/M9/M13/POD/Helix, TC's "G" series, or any similar format products? Or are these only useful for the FX8 in 4-cable method? What about with an AxeFX rig running straight into a...
- GMGM
- Thread
- Mar 29, 2016
- humbuster line 6 non-fractal non-fx8
- Replies: 10
- Forum: FX8 Discussion

Tags