Introducing Axe for Lemur version 2.03
https://dl.dropbox.com/u/54889552/AxeForLemur.2.03.zip
Change Log:
****************************************
Axe for Lemur version 2.03
Apr 7, 2013
Added two new pages w/ controls for the following blocks:
- Feedback Send/Return
- FX Loop
- Mix1 and Mix2
- Gate / Input Impedance
- Output
- Controls (LFO1, LFO2, ADSR1, ADSR2, ENV, SEQ)
Added Tuner Page
Axe-FX II firmware v10.0 support:
- Amp
- Add new amp models and tonestack types
- Pres/Depth Type (not shown on axe front panel or AE) is still user editable!
- Add new controls:
- Mstr Vol Trim
- Pwr Supply Type
- AC Line Freq
- Tube Type
- Dynamic Presence
- Dynamic Depth
- Character
- Character Freq
- Thunk
- Bias Trem Freq
- Bias Trem Depth
- Removed controls:
- Spkr Mid F
- Spkr Mid Q
- Spkr Mid Res
- Cab
- Add the new factory cabs
- Support a total of 100 user cabs using a new dialog
- new Prox R control is shown when in stereo cab mode
- Looper
- Add Trim Start and End control
- Add Play Immediate button
- Filter
- Add new controls: Low Cut and High Cut
- Reverb
- Support new reverb type "Stone Quarry"
- Drive
- Support new clip type "Null"
Other Changes
- Complete rework of PEQ to use faders instead of knobs
- Complete rework of GEQ to use faders instead of multislider
- Improved layout on some other blocks: CHO, CPR, FILT
- Other minor layout changes and improvements
Auto-Sync Changes:
- Changed the way some incoming CC messages are recognized:
- Template listens to MIDI TARGETS 0, 1, 2, and 3, simultaneously
- Template listens only for messages on the AxeFX midi channel (as set & selected on Preset Page)
- If AUTOSYNC=ON, the template will detect any CC message that matches a CC# from the last bypass
state response from the AxeFX - this event triggers a resync of the bypass states after a short
pause
- If AUTOSYNC=ON, the template will detect any CC message that matches the Scene Select/Inc/Dec
CC# as set in aUser.cMidi.gen2.scenescc - this event triggers a resync of the scene state after
a short pause
- Note that if AUTOSYNC=OFF, the template effectively ignores these incoming CC messages
- Improved detection of events that should trigger auto-sync:
- Amp block, change amp type or preamp type
- Drive block, change type
- Phaser block, change type
- Flanger block, change type
- Chorus block, change type
- Delay block, change type or mode
- Reverb block, change type
- Pitch block, change type
- Auto-Sync displays the active instance of multi-instance blocks. This action is triggered on receipt
of the bypass state response from the AxeFX. When using Scenes to switch between Amp1 and Amp2, the
template's amp page will automatically switch to the currently active amp block. This feature was
suggested by SimonDreyer on the Fractal Forum. Thanks Simon!
Changes to reduce Lemur memory use:
- Reworked MIDI Settings, Favorites, and Keypad sections on Preset page to use fewer Lemur objects
- Eliminated about 70 separate init scripts by combining into just 3 scripts (see cS.initstage3, 4, 5)
- Synth block keyboard has been reworked to use less memory by combining more than 25 individual scripts into one
- Combined about 40 individual scripts in cTabSel into three scripts
- Reworked pitch block arp pattern dialog
Fixed bugs
- If preset contained two instances of a block type which has no XY setting (e.g. ROT1 and ROT2 in the same preset), the status LED and auto refresh for this block did not update correctly when toggling between instances.
- Missing Delay block LFO2 Phase control
- Looper status was not working
- Muxed faders sometimes not initializing during query sequence
- No retry when auto-querying bypass states if byp state response was corrupt
- At launch, template should display Axe for Lemur screen, not Ext Control
- GEQ controls were missing in Standard/Ultra mode
- PAN block controls not showing/hiding correctly when switching between pan and term mode
- MGT block Time fader not working / controlling wrong parameter
- DLY block Delay Tempo (Right) dialog caption incorrect
- Other minor bug fixes
- Many typo corrections