Probably 0dB, which means no change.Mr. Cliff - what was the USB level equivalent, before you added the adjustability, so I can set mine to how it used to be, since I was happy with it.
Thanks,
Rodney
Probably 0dB, which means no change.Mr. Cliff - what was the USB level equivalent, before you added the adjustability, so I can set mine to how it used to be, since I was happy with it.
Thanks,
Rodney
Another of my "out of the box" thinking you can achieve similar results using the sequencer to program complex tremolo patterns, but using two different tremolo blocks with the speed controlled by tempo, like I do here, is much quickerNice! Now you've got me hankering to experiment with mixing tempos across two trems.
Ah, but not with the same texture and fluidity.you can achieve similar results using the sequencer to program complex tremolo patterns, but using two different tremolo blocks with the speed controlled by tempo, like I do here, is much quicker
2.03
Added Looper Crossfade parameter. When set to ON the loop fades out/in at the end/start of the loop.
interface.
Another of my "out of the box" thinking you can achieve similar results using the sequencer to program complex tremolo patterns, but using two different tremolo blocks with the speed controlled by tempo, like I do here, is much quicker
Check your USB levels in Setup->I/O->USB. Then make sure you've selected the appropriate ins and outs in Cab-Lab audio settings.Cab-Lab 3 Live Mode is still not working on my Axe-FX III
Am I missing something?
I am following the instructions from the user manual:
http://www.fractalaudio.com/downloads/cab-lab/Cab-Lab-3-Manual.pdf
The test tone is working, but there is no sound in Live Mode
0.0Mr. Cliff - what was the USB level equivalent, before you added the adjustability, so I can set mine to how it used to be, since I was happy with it.
Thanks,
Rodney
Nah - I still have a pedalboard for my tube amps and that Flint is going nowhere. Best pedal Strymon has made, IMHO.F/S—several thousand Flint, Supro, and other assorted Trem pedals around the world.......
"Stealth" update
Check your USB levels in Setup->I/O->USB. Then make sure you've selected the appropriate ins and outs in Cab-Lab audio settings.
Make sure you have an Output 1 block in your preset.
Make sure you have an Output 1 block in your preset.