LF = momentary switch, 1-R = latching switchGuitarDojo said:Wasnt the only difference between the SP-1 and SP-LF the polarity switch in the SP-1R's?
Ok. No i remember but that was a while back when he explained it to me. I cant the attention of a cat trapped in a yarn factory anyway..godprobe said:LF = momentary switch, 1-R = latching switchGuitarDojo said:Wasnt the only difference between the SP-1 and SP-LF the polarity switch in the SP-1R's?
(so not so much polarity, but type)
favance said:So now that I've had a look at the manual, it shows that Expression Pedals are connected using a TRS Cable (not a guitar cable). Does this mean the Mission Pedals like the SP-1 need 2 TRS Cables connected to the MFC-101? Or do you use a Y Cable with the Y connected to the SP-1 and the TRS connected to the MFC-101? Or do you need 2 TRS Cables for 1 SP-1, in order to use the On/Off Switch to control the Effect...
I knew you were a BETA LOLGuitarDojo said:I am using the SP-1 (now LF). Works great for my wah. Rocktron Utopia for volume.
if I'm not wrong you would only need 1 TRS and 1 TS cable to achieve this. The TRS cable is used to connect the expression pedal out to the Expression Pedal Input on the MFC and the TS cable is used to connect the switch on the pedal to the Switches Input on the MFC.Mike Snider said:favance said:So now that I've had a look at the manual, it shows that Expression Pedals are connected using a TRS Cable (not a guitar cable). Does this mean the Mission Pedals like the SP-1 need 2 TRS Cables connected to the MFC-101? Or do you use a Y Cable with the Y connected to the SP-1 and the TRS connected to the MFC-101? Or do you need 2 TRS Cables for 1 SP-1, in order to use the On/Off Switch to control the Effect...
two TRS needed for the SP-1
one TRS goes from mission out(for switch) and connects into the MFC 101 switch connector. This allows you to turn the expression (cc control for an effect or modifier) on/off.
TRS cable 2 connects from Mission out 9for expression) and connects to MFC 101 expression 1 or 2 or 3 or 4.
browlett said:Would it be possible to get one of those pedals with the latching switch and the multiple TRS connections, but not use the switch? In other words, can you decide to not connect the "switch" connections, but still use the expression pedal? ...This way, you have other options. You wouldn't have to use a switch input if you don't want to.
FreaqyFrequency said:I wonder if they're already on the case of building an optimized pedal for the MFC. :mrgreen:
favance said:Ok...I'm convinced. Just pulled the trigger on 2 Mission SP-1R Pedals. Thanks to everyone.