Way to mute Out 1 L/R and Out 2 L but keep Out 2 R un-muted?

[barhrecords]

I use Out 1 for FOH and Out 2 to drive a TC Electronics VoiceLive 3 for vocal harmonies and Out 2 to a dedicated floor wedge for guitar monitor.

I want to keep the feed to the VoiceLive 3 active but mute the FOH and the guitar wedge. For singing acapella sections where the guitar is tacet. I play "silent" chords to drive the harmonies.

Out 1 L/R -> FOH
Out 2 L -> Stage Wedge
Out 2 R -> Vocal harmonizer

So I need a way to mute Out 1 L/R and Out 2 L but keep Out 2 R active?

 

[Bakerman]

First you'd need to get signal to Out 2 via FX Loop block if not doing so already, instead of Output 2 Echo = Input 1.

There are various ways to do the rest of this. One would be an Ext Ctrl that mute-bypasses a filter or vol/pan block in the Out 1 path, and engages one (set for thru bypass mode) with balance fully right, in the Out 2 path. A scene could also be configured with the blocks in those states.

 

[barhrecords]

Thanks

This worked like a champ.

Two filter blocks with bypass set to the same extern.

With one IA switch, I invert the states of the two blocks.

I bypass the Filter block on Out 1 and have its bypass mode set to mute.

Then activate the Filter block feeding Out 2 with it's balance all the way right.