JohnRaptor
Inspired
I hope someone can please help me here because I am going crazy trying to get my rig set up and I keep falling short.
Here is my main goal - I want to have my KPA and my AXEFXII hooked up and working together in tandem. I would like to plug my guitar into my KPA and have my AXEFXII connected into my KPA so I can use the effects of the Axe with my KPA profiles. I would also like to be able to run my Axe 'solo' when I want to just jam on my AxeII and record, same with the KPA.
Ok, I have tried various ways to hook them together but so far nothing is working. I also have a new Audio interface I am using, a Presonus 1818VSL. OK I hook my KPA up to the interface by S/PDIF and the Presonus mix software instantly recognizes the KPA and I see the signal. My monitors are connected thru the main outs on the interface and with a turn of the monitor volume knob I hear my patch perfectly.
I then took my Axe and plugged two cables from the OUTPUT1 in the back of the Axe into the LINE 3/4 inputs on the interface. If I plug headphones into my Axe it's perfect and I hear it fine. The problem is my interface seems to not have any signal from the Axe at all. What is going on? COnnecting into the line in's should work shouldn't it? My computer has the Presonus interface selected for in/out soundcard device. My Axe is plugged into computer with USB. Axe Edit works fine as well but there is absolutely no signal in my interface mix software and I dont see a signal on my interface.
Now regarding combining the Axe FX and Kemper, I assume I need to use a midi cable? FX loop connection? I know this can be done but I cannot find any clear method and its driving me crazy! Can someone please give me some guidance here?
Thanks so much for any help!
Here is my main goal - I want to have my KPA and my AXEFXII hooked up and working together in tandem. I would like to plug my guitar into my KPA and have my AXEFXII connected into my KPA so I can use the effects of the Axe with my KPA profiles. I would also like to be able to run my Axe 'solo' when I want to just jam on my AxeII and record, same with the KPA.
Ok, I have tried various ways to hook them together but so far nothing is working. I also have a new Audio interface I am using, a Presonus 1818VSL. OK I hook my KPA up to the interface by S/PDIF and the Presonus mix software instantly recognizes the KPA and I see the signal. My monitors are connected thru the main outs on the interface and with a turn of the monitor volume knob I hear my patch perfectly.
I then took my Axe and plugged two cables from the OUTPUT1 in the back of the Axe into the LINE 3/4 inputs on the interface. If I plug headphones into my Axe it's perfect and I hear it fine. The problem is my interface seems to not have any signal from the Axe at all. What is going on? COnnecting into the line in's should work shouldn't it? My computer has the Presonus interface selected for in/out soundcard device. My Axe is plugged into computer with USB. Axe Edit works fine as well but there is absolutely no signal in my interface mix software and I dont see a signal on my interface.
Now regarding combining the Axe FX and Kemper, I assume I need to use a midi cable? FX loop connection? I know this can be done but I cannot find any clear method and its driving me crazy! Can someone please give me some guidance here?
Thanks so much for any help!