TUTORIAL UPDATE:
https://www.cabir.eu/de/content/13-mfc101-for-axefx3
On the last page you will find for download:
MFC-101 Original/MKII default configuration.syx and matching
Axe-Fx III Systemdata.syx in a ZIP file. You can install both on your devices with Axe-fx Fractal-Bot and you are ready to go.
Default settings
MFC101MKI_ORIGINAL_MKII_default_Axe-Fx3.syx:
View attachment 47862
Axe-Fx III System settings: AXEIII_MIDIRemote_defaults.syx : Contains all MIDI/Remote CC# presets listed in the tutorial above and corresponds to the MFC101MKI_ORIGINAL_MKII_default_Axe-Fx3.syx configuration file.
(Tested with Axe-Fx III and FW 1.10)
Notes:
· CC# OFF 000 and ON 125? Yes, because these values work equally for FX BYPASS switches (000 = bypass; 125 = engaged) and FX CHANNEL switches (000 = Ch. A; 125 = Ch. B)! So you don't have to change CC# on/off values, but only select the c1 CC# from the Axe-Fx III MIDI/Remote table whose function you want to switch. No matter if it should be a FX BYPASS or FX CHANNEL or FX TUNER switch.
Easy!
· You don't need preset (PC#) 2 on MFC-101 Bank 2, but another one? Use BANK UP/DOWN to select Preset 2 (= MFC-101 Bank 2, FIRST Preset). Click EDIT. Click PRESET. Click 2x page right. Change the preset number (PC# Ch01). Done.
Easy!
You want less scene switches? Maybe only 5 instead of the programmed 8? Select Bank1, Preset 1. click EDIT. click SETUP. Right click page to BankSize. Set five. Then copy (EDIT->COPY->Copy Bank) the new Bank 1 (5 Presets or "Scenen") to all available banks of the MFC-101 and configure the preset numbers of the Axe-Fx III, which are to be controlled per bank, as described above. All you have to do is configure the first preset per MFC-101 Bank!
Easy!