Turning of the wah

ritchgbg

ritchgbg

Member
Hi guys !I use a mission pedal (with the spring thingy).
It works fantastic but :I have let's say one preset with the wah , not activated.
I use the pedal, the wah works perfectly
But when i remove my foot from the pedal, it sounds like the wah is still activated.Any advice on how to turn it off when i remove my foot from the pedal please ?
Thanks
 
Gday Ritch,
Not sure ...but try;
-Select the wah block in axe edit
-right click on the Control knob (the edit modifier dialog pops up)
-Check that the 'Auto engage' setting is (perhaps) fast

thanks
Pauly
 
As above, AutoEngage is problably what you are looking for here.

I use a similar method for a preset I created with a Formant block to mimic an Alice in Chains track (Man In the Box).
 
You have to set the off level after calibrating the pedal. Follow the instructions in the manual for calibrating the pedal. Go to the Auto-Engage settings and, if your wah isn't disengaging at the bottom (heel down) position of your pedal, raise the percentage for the off setting. The speed setting controls how quickly it reacts so it doesn't cut out if you inadvertently heel down the pedal during performance when you don't want it to turn off. Fiddle with those until it does what you want!
 
You must log in or register to reply here.
Back
Top Bottom