JoeyBTL
Inspired
I just recently read the thread posted by Warrior on a similar issue I've been having so it inspired me to make one of my own instead of jacking his. It seems for a while now I've have this odd flubbyness to my patches. It is less on tighter higher gain models but seems to be a lot more prominent when I take a clean amp and put something like an 808 in front of it. So it's not on a certain IR or amp specifically. I hear it whether I'm going straight into my mac via USB, output to my Mackie speaker via XLR, or output to the power section of my Fender combo amp via guitar cable. I'm coming to the conclusion that something is off somewhere a long the line but don't know what. After reading the thread I mentioned I just came across this video:
It sounds awesome and he put that patch on Axe Change. So I loaded it up and I definitely hear a difference between the video and whats coming from my setup. I'm on the newest Quantum beta and I'm not sure what firmware this patch is from but I've been having this problem for a while now.
http://axechange.fractalaudio.com/detail.php?preset=3618
I made a recording to show whats going on. So first its an standard Fender Strat on the single coil neck pickup (neck pickups on any of the guitars I try make it worse, for obvious reasons), then goes to my PRS Santana SE with humbuckers switching between both pickups, then still on the PRS with the bass on the preset down to 1 switching between pickups, then staying on the PRS with the bass back up to but with a highpass filter set around 300 Hz. That last part is what really irks me because its obviously taking a lot of the bass frequency out but you can still tell something funky is going on. I used both guitars to show the differences here, especially since the video showing the preset is done with a tele, then the humbucker guitar emphasizing what I'm hearing.
I'm very happy to answer any questions anyone has or try any suggestions. I have tried some obvious things and a couple things I've found from different threads but I haven't gone as far as doing a full system reset. If you guys think that will help I'll give it a go. Thanks!
It sounds awesome and he put that patch on Axe Change. So I loaded it up and I definitely hear a difference between the video and whats coming from my setup. I'm on the newest Quantum beta and I'm not sure what firmware this patch is from but I've been having this problem for a while now.
http://axechange.fractalaudio.com/detail.php?preset=3618
I made a recording to show whats going on. So first its an standard Fender Strat on the single coil neck pickup (neck pickups on any of the guitars I try make it worse, for obvious reasons), then goes to my PRS Santana SE with humbuckers switching between both pickups, then still on the PRS with the bass on the preset down to 1 switching between pickups, then staying on the PRS with the bass back up to but with a highpass filter set around 300 Hz. That last part is what really irks me because its obviously taking a lot of the bass frequency out but you can still tell something funky is going on. I used both guitars to show the differences here, especially since the video showing the preset is done with a tele, then the humbucker guitar emphasizing what I'm hearing.
I'm very happy to answer any questions anyone has or try any suggestions. I have tried some obvious things and a couple things I've found from different threads but I haven't gone as far as doing a full system reset. If you guys think that will help I'll give it a go. Thanks!