Awesome!I will be updating all the presets for FW 5.0 shortly given the changes to amp block! Now that there are a good number of FC starting to head into the field, the FC section will be available soon.
Thanks Cooper. Your tutorials are always money well spent. I've been using Fractal for 12 years and still pick up things to try. Thanks for all you do for us here!I will be updating all the presets for FW 5.0 shortly given the changes to amp block! Now that there are a good number of FC starting to head into the field, the FC section will be available soon.
Cooper ,Just wandering when and if you are still considering a video class for the FC6 and FC 12 ???
I will be updating all the presets for FW 5.0 shortly given the changes to amp block! Now that there are a good number of FC starting to head into the field, the FC section will be available soon.
Cooper - it cracked me up that you were on V1 of the firmware in the videos. How long before you run out of breath catching up with Cliff?I will be updating all the presets for FW 5.0 shortly given the changes to amp block! Now that there are a good number of FC starting to head into the field, the FC section will be available soon.
Does anyone know when the FC-12 section will be added on the Copper Carters course? (excellent course!)
Thanks,
Rob
This was a reply from Cooper from the DAW section of his course;
"How could I set up the Axe FX III to output a MIDI note to a Garage Band or Logic Pro instrument (AU Sampler). To take that further, I would like to send that note/message via the FC-12. In other words, I'd like to control start and stop of samples I have loaded on a DAW software instrument (sampler) in order to trigger them live.
0
Reply
Cooper Carter
15 days ago
Use a midi block attached to a control switch! I'll be covering this is the FC section that will be available soon."
So hopefully anytime now.
Anyone know of it's possible to do this if not using midi DIN port?For the FC scenario, you can Configure CS MIDI for one of the 6 control switches. Add the CS to one of the FC switches. Now when you press the switch on the FC the AxeFx will output the midi you programmed for that CS MIDI via the AxeFx MIDI out DIN port.
As far as I know, it only sends out the DIN port.Anyone know of it's possible to do this if not using midi DIN port?
I use a tablet that uses midi thru the USB port.
Samples reside on tablet using Cantible.
Right now I trigger my samples using an MC 6.
MC 6 usb plugged into tablet.
Tablet USB-C to Axe USB for midi.
Would be cool if I could do it thru my FC-6 instead.