overture1922
Inspired
Really cheap alternative that works great. Follow these instructions step by step.
1-You will need both the footswitch and the bluetooth midi receiver. You can find them on Aliexpress. Remember to charge both before starting.

1.1-I recommend updating them both. You can download the SincoOTA app and the firmware at http://www.cuvave.com/appdownload
I was only able to use the Android version, as the Windows version didn’t work. Be patient, as the SincoOTA app doesn’t work very well. If you’re unable to update, try the following steps: close the app, reopen it, turn off the Bluetooth, turn it back on, try using another Android phone, and repeat the process until the update works.
2-Download the Cuvave Cubesuit editor at http://www.cuvave.com/appdownload. It is available for PC, Android, Mac OS and IOs. In this tutorial
I´m using Android.
3-Turn on the footswitch and pair it to the smartphone via bluetooth
4-Open Cuvave Cubesuit and click on ´´FootCtrl´´

5-Go to Custom control. Set MIDI Channel to 1.

6-Click on ´´Undefined´´ Footswitch [A] and set it as:

7-Repeat the procedure for each footswitch as:

Now, the footswitch will be recognized by the Fm3 as:

8-Exit the editor. Unpair the footswitch then turn it off.
9-Turn on the Fm3 and connect the midi receiver.

10-After boot, turn on the receiver, then turn on the footswitch. Now they will pair, and if it is done correctly, booth LEDs will stop blinking.

11-On FM3 go to Setup > MIDI/Remote > Other
12-In this example, I configured the footwitch A (CC#20) to activate the Scene Increment and the footwtch B (CC#21) to activate the Scene Decrement. You can set other functions to the other footwitches as you like.

PS: Once configured the footswitch will also work with PC Plugins like Neural Dsp, S-Gear, etc using it with the bluetooth midi usb receiver which is also included. The only thing you have to do is turn off the ´´visual behavior´´ option on the steps 6 and 7.
UPDATE: to activate certain things without problems (like the tuner) you have to assign these specific codes (in my case I have the footswitch D for the tuner). On FM3 select CC#15 on Setup/MIDI Remote/Other/Tuner

UPDATE 2: how to connect an expression pedal to M-vave Chocolate:
https://forum.fractalaudio.com/thre...e-m-vave-chocolate.186861/page-3#post-2557102
UPDATE 3: how to it with midi trs cable
https://forum.fractalaudio.com/thre...3-cuvave-m-vave-chocolate.186861/post-2599122
1-You will need both the footswitch and the bluetooth midi receiver. You can find them on Aliexpress. Remember to charge both before starting.

1.1-I recommend updating them both. You can download the SincoOTA app and the firmware at http://www.cuvave.com/appdownload
I was only able to use the Android version, as the Windows version didn’t work. Be patient, as the SincoOTA app doesn’t work very well. If you’re unable to update, try the following steps: close the app, reopen it, turn off the Bluetooth, turn it back on, try using another Android phone, and repeat the process until the update works.
2-Download the Cuvave Cubesuit editor at http://www.cuvave.com/appdownload. It is available for PC, Android, Mac OS and IOs. In this tutorial
I´m using Android.
3-Turn on the footswitch and pair it to the smartphone via bluetooth
4-Open Cuvave Cubesuit and click on ´´FootCtrl´´

5-Go to Custom control. Set MIDI Channel to 1.

6-Click on ´´Undefined´´ Footswitch [A] and set it as:

7-Repeat the procedure for each footswitch as:

Now, the footswitch will be recognized by the Fm3 as:

8-Exit the editor. Unpair the footswitch then turn it off.
9-Turn on the Fm3 and connect the midi receiver.

10-After boot, turn on the receiver, then turn on the footswitch. Now they will pair, and if it is done correctly, booth LEDs will stop blinking.

11-On FM3 go to Setup > MIDI/Remote > Other
12-In this example, I configured the footwitch A (CC#20) to activate the Scene Increment and the footwtch B (CC#21) to activate the Scene Decrement. You can set other functions to the other footwitches as you like.

PS: Once configured the footswitch will also work with PC Plugins like Neural Dsp, S-Gear, etc using it with the bluetooth midi usb receiver which is also included. The only thing you have to do is turn off the ´´visual behavior´´ option on the steps 6 and 7.
UPDATE: to activate certain things without problems (like the tuner) you have to assign these specific codes (in my case I have the footswitch D for the tuner). On FM3 select CC#15 on Setup/MIDI Remote/Other/Tuner

UPDATE 2: how to connect an expression pedal to M-vave Chocolate:
https://forum.fractalaudio.com/thre...e-m-vave-chocolate.186861/page-3#post-2557102
UPDATE 3: how to it with midi trs cable
https://forum.fractalaudio.com/thre...3-cuvave-m-vave-chocolate.186861/post-2599122
Last edited: