• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Seperate Monitor out?

frama78

New Member
Hi,

I´m pretty much GASing for an AX8, but I do need one routing option of which Im not sure, if it´s supported:

I´d like to recieve a Monitor-Signal (or MP3 for home-use) from FoH and feed this in Input 2. Now, Id´like to mix this signal with the guitar-path. This should go out to Output 2 L&R.

The main outs should send only the guitar path to FoH.


Is this possible?

Thx,
Frank
 

toddwh50

Member
I’m a fairly new user but I do this using the FX Loop block. It can serve as a split at the end of the signal path to send the signal to the Loop out. It doesn’t need to come back in. So mains go to FOH and Loop Out goes to Mons.

I guess this would not work if you need the effects loop for more traditional purposes but it works for me.
 

moerker

Inspired
Hi,

I´m pretty much GASing for an AX8, but I do need one routing option of which Im not sure, if it´s supported:

I´d like to recieve a Monitor-Signal (or MP3 for home-use) from FoH and feed this in Input 2. Now, Id´like to mix this signal with the guitar-path. This should go out to Output 2 L&R.

The main outs should send only the guitar path to FoH.


Is this possible?

Thx,
Frank
Simple answer:
Nope.

Signal from FoH would be inserted to FX-Return, so you are after the FX-Send. Only way out would be the "normal Out".
What you may do (if you do not want stereo effects and don't mind that the mixed monitor signal will also be mono) is to set up a routing where you hard pan one signal to left, one to right; sending basically your mixed (mono) signal via e.g. left output and guitar only via right output.

I use something like this to both have a "neutral" signal for a guitar box and a signal with IR for the FoH.
 

toddwh50

Member
Ah, I misread.

I cannot insert the FOH in in the AX8 but my FRFR monitor has a 2nd input and I can put a signal into that. I also have a little mixer I can use for things like that.

Otherwise moerker seems right about creatively using L vs R paths.
 
Top Bottom