1. We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.
    Dismiss Notice

Screen problem, please help!

Discussion in 'Axe-Fx II Discussion' started by FastTempoFever, Jul 10, 2018.

  1. FastTempoFever

    FastTempoFever
    Expand Collapse
    New here

    Joined:
    Mar 1, 2016
    Messages:
    6
    Likes Received:
    1
    Lately I'm dealing with a very strange screen problem, the screen suddenly became dim one day and I had to set the contrast to max to be able to see something. I tried changing the alimentation cable, changing electrical outlet and reconnecting the ribbon cable inside the axefx but nothing changed. A really strange thing is that sometimes the screen return to his orginal contrast like it's fully working without problems but then after some time has passed it turns dim again. I really don't know what to do, do you think I need to send it to assistance or I can do something on my own?
     
    Toopy14 likes this.
  2. Rex

    Rex
    Expand Collapse
    Legend!

    Joined:
    Jul 22, 2010
    Messages:
    18,346
    Likes Received:
    8,360
    Might be a cold solder joint somewhere. Or it could be something else. Contact Support and see if they have any ideas.
     
  3. Toopy14

    Toopy14
    Expand Collapse
    Forum Addict

    Joined:
    Dec 5, 2013
    Messages:
    1,737
    Likes Received:
    1,679
    Location:
    Ontario, Canada
    I had the same issue, I took the cover off and re-seated the ribbon cable connected to the LCD. Fixed the problem and I haven’t had an issue since.
     

Share This Page