• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

RATT Round and Round SOLO

Christian Gendics

New Member
I’m playing Round and Round in one of my bands, does anyone know how to get the pitch block setup for the duel guitar solo, I saw some threads on this for other fractal units but couldn’t figure it out on the ax8, thanks
 

Moke

Axe-Master
Vendor
Here is an example of the 'Shift' values to use.
It can be used for lots of other songs. Just set the Key parameter in the Pitch block to whatever key you are playing in. Set the High Cut to around 5000 to 6000 Hz. Put the block between the Amp and Cab blocks. Use a hard panned Stereo Cab block if you want to do some harmony panning.
'A' SHIFT - 3 semi
'A#' SHIFT - 3 semi
'B' SHIFT - 3 semi
'C' SHIFT - 4 semi
'C#' SHIFT - 3 semi
'D SHIFT - 3 semi
'D#' SHIFT - 4 semi
'E' SHIFT - 5 semi
'F' SHIFT - 4 semi
'F#' SHIFT - 3 semi
'G' SHIFT - 4 semi
'G#' SHIFT - 3 semi
 

Bakerman

Axe-Master
Instead of a global scale you can use intelligent harmony block type with scale = custom, 6 notes, A-B-C-D-E-G. That will sound better during the bends and work for most of it, except for the 4th & 8th measure which are mostly thirds, plus a unison A in the 5th measure.
 

Christian Gendics

New Member
Here is an example of the 'Shift' values to use.
It can be used for lots of other songs. Just set the Key parameter in the Pitch block to whatever key you are playing in. Set the High Cut to around 5000 to 6000 Hz. Put the block between the Amp and Cab blocks. Use a hard panned Stereo Cab block if you want to do some harmony panning.
'A' SHIFT - 3 semi
'A#' SHIFT - 3 semi
'B' SHIFT - 3 semi
'C' SHIFT - 4 semi
'C#' SHIFT - 3 semi
'D SHIFT - 3 semi
'D#' SHIFT - 4 semi
'E' SHIFT - 5 semi
'F' SHIFT - 4 semi
'F#' SHIFT - 3 semi
'G' SHIFT - 4 semi
'G#' SHIFT - 3 semi
Thanks a lot I’ll try that for sure!
 
Top Bottom