Preset Download CPU overload

P

piperwd

Member
Downloaded a preset from Brett Kingman(Gigrig JB59). Unfortunately it’s hitting 80% on the CPU and shutting down. I’m new to FM3. Any ideas on how to solve the overload?

Thank You All
 
Using FM3 Edit, download the preset from Axe Change and before playing anything, use the "Save All Blocks to Library" in the FM3 Edit 'Preset' tab. Then look at the blocks in the preset and decide which blocks you might be able to live without and replace them with shunts (right-click on the block and select 'Shunt' from the menu) until you get below 80% and save the preset. Just replacing the M-Comp block with a shunt drops it down to @ 75%. Save the preset, then switch to another then back and the WARNING will go away.

You can then replace other blocks with shunts to get the CPU lower and add the M-Comp block from the Block Library to see if it's a block you want to use in the preset. You can do the same with every block in the preset since they're all in your Block Library.
 
sometimes Edit moves more slowly than hardware at higher CPU.

if you can change the Cab blocks to Normal Res on the hardware and/or delete any reverb blocks, it could help.
 
JoKeR III said:
Using FM3 Edit, download the preset from Axe Change and before playing anything, use the "Save All Blocks to Library" in the FM3 Edit 'Preset' tab. Then look at the blocks in the preset and decide which blocks you might be able to live without and replace them with shunts (right-click on the block and select 'Shunt' from the menu) until you get below 80% and save the preset. Just replacing the M-Comp block with a shunt drops it down to @ 75%. Save the preset, then switch to another then back and the WARNING will go away.

You can then replace other blocks with shunts to get the CPU lower and add the M-Comp block from the Block Library to see if it's a block you want to use in the preset. You can do the same with every block in the preset since they're all in your Block Library.
Click to expand...
Thank You for the help. It worked
Will
 
You must log in or register to reply here.
Back
Top Bottom