Post Your FC-12 and FC-6 Pedalboards Here

So I shrank my board to a Volume Pedal and A Wah, with a modified MXR Tap switch to activate my Strobo Rack tuner. I found myself not using the other 2 exp pedals that much and seeing as I still had my Duo 34 it was an easy choice. added the side input and I have to option to run the other 2 pedals off the board if I so desire.
Before


After

 
Decided to add a pair of these dual switches I had sitting around from my old MFC-101. Set them up as stand-in switches. So easy to setup. Each has short/long press: 1) amp lvl +/- 2) Efx 1/2 3) Scenes/Presets 4) Looper/Tuner. Works like a charm.
 

Attachments

  • FC12.jpg
    FC12.jpg
    3.8 MB · Views: 122
Last edited:
I am currently trying to complete my pedal board with the FC12 and expression pedals. I am struggling on how to secure the FC12 safely. I have a power train 32x16 with hard shell case. Any suggestions or what worked well for you securing it to the board/rails?
 
Having owned an FX2 XL+ with MFC-101 previously, after I got my FX3 and FC12 I decided it was time to get the pedalboard/case updated.

This has a removable lid on lift-off hinges so when in transit it is fully protected but really needed some additional 'oompf' when on stage. Having seen all the LED lit offerings on this forum that made my decision for me.

LED RGB 5050 strips supplied the lighting, the logo area (currently occupied by FAS) can be modified to use any logo I want such as the band name. Effectively this is some frosted perspex that has a printed OHP sheet overlaid.
10000mAh power bank supplies the power thru USB and the remote control allows me to alter the static colour or have some funky colour fades.

FC12 Daylit.jpeg

FC12 Dark.JPG
 
Having owned an FX2 XL+ with MFC-101 previously, after I got my FX3 and FC12 I decided it was time to get the pedalboard/case updated.

This has a removable lid on lift-off hinges so when in transit it is fully protected but really needed some additional 'oompf' when on stage. Having seen all the LED lit offerings on this forum that made my decision for me.

LED RGB 5050 strips supplied the lighting, the logo area (currently occupied by FAS) can be modified to use any logo I want such as the band name. Effectively this is some frosted perspex that has a printed OHP sheet overlaid.
10000mAh power bank supplies the power thru USB and the remote control allows me to alter the static colour or have some funky colour fades.

View attachment 96435

View attachment 96436
Slick!
Not sure that's where I'd want my III hanging out in real life though.
 
@bishop5150 @Maddface

Pedal Train Classic 32 x 16.... I am off to buy something to make risers for the pedals right now. Case is a lil bigger than I hoped but I had to do a hard case as the last PT I had was with a soft case and it always just fell over. Middle picture is the adapter that goes into the Metal Dozer mic stand holder Ill mount at the top of the board. Mic stand will be able to store w the board.

I plan on mounting 4 switches on the board at my feet for channel changes....Yes, Scene Ignore hahah Ill update as we go.
 

Attachments

  • 20220325_143025.jpg
    20220325_143025.jpg
    1.6 MB · Views: 66
  • 20220325_143352.jpg
    20220325_143352.jpg
    1.4 MB · Views: 68
  • 20220325_143522.jpg
    20220325_143522.jpg
    2 MB · Views: 71
Installed....need a Lil black marker for the white riser material which is corrugated plastic.

The Dozer actually came today so I put it on too.

Edit
I'll be modifying the PT. I can't handle the angle. Need the board flat.
 

Attachments

  • 20220325_190258.jpg
    20220325_190258.jpg
    1.7 MB · Views: 79
  • 20220325_190235.jpg
    20220325_190235.jpg
    1.5 MB · Views: 73
  • 16482500128262738578622044574243.jpg
    16482500128262738578622044574243.jpg
    1.3 MB · Views: 76
Last edited:
Hi all,

I updated to the FC12 MKII last week and have been meaning to post a pic but have just been too busy! I got the MKII last Friday and hooked it up to my pedalboard. I did a gig with it last Saturday and what a difference! It's not a struggle to see anymore. If you're thinking of upgrading to the MKII and can afford it I can't recommend it enough.

Anyway here's some pics for you all enjoy!

IMG_0299.jpegIMG_0300.jpegIMG_0301.jpeg
 
Installed....need a Lil black marker for the white riser material which is corrugated plastic.

The Dozer actually came today so I put it on too.

Edit
I'll be modifying the PT. I can't handle the angle. Need the board flat.
I've ordered one of those Mod Stands from Metaldozer Machine Works too! Did you have to use the Atlas Sound stand as well? I'm guessing they are the only one's that fit as Jay recommended them to me too!
 
Hi all,

I updated to the FC12 MKII last week and have been meaning to post a pic but have just been too busy! I got the MKII last Friday and hooked it up to my pedalboard. I did a gig with it last Saturday and what a difference! It's not a struggle to see anymore. If you're thinking of upgrading to the MKII and can afford it I can't recommend it enough.

Anyway here's some pics for you all enjoy!

View attachment 100968View attachment 100969View attachment 100970
I'm going to be bugging you for some measurements for that soon mate!

Congrats - looks so much easier to read
 
I'm going to be bugging you for some measurements for that soon mate!

Congrats - looks so much easier to read
Lol no worries happy to help if I can! I was wondering when or if you were gonna make some Zenguards for the MKII's. I didn't want to bother you as I know you've had a lot on the last few months. Well worth the upgrade if you're thinking about it!

Still trying to sell my MKI on Ebay! I think I have it up for too much lol.
 
Back
Top Bottom