Looks like a nice arrangement.View attachment 57499
My twins...
Transport they are on nice boards with rubber feet.Do you use them in the cases or are those just for transport ?
Yeah--I think so too.I've tried the Axe's pitch block but I find its latency is a bit more than the Drop's.
Rao Saheb, Jhakaas.Here's a reworked pedalboard now with Loopi Mini Expression Knobs. Now I have four expression pedals and also a volume control.
Finally received my FC12 y'day after a wait of Almost 3 months. Although I love all the complexities of the pedal, I feel the footprint is slightly larger - in length. In my opinion my previous MFC Mark III has the ideal size for a midi foot controller. But that's just my view. I'm sure FAS has thought about this design for a reason. Anyways I'm posting couple of pics I clicked this morning. First thing I did - used a cellophane to cover all mini displays before they would scratch up. I'll Need professional protectors for both main display as well as mini displays. But for time being this should help a little.
Hey Chad, how did you stick your FC12 and EV1s to the pedal board? I also have the same setup. The reason I ask is as I noticed small bumps beneath the FC12 .... and 6 small grips (stands) beneath the EV1s. So the velcros wont fit.
I had to remove the rubber end caps to secure it with Velcro. But I've recently switched to a Temple Audio board and attached it directly to the board via the feet screws.
Remove the rubber end capsWhat about the FC12? It also have 4 rubber bumps at the corners? How do we velcro that?
Hi. You will have to remove the rubber ends on FC 12 and rubber feet in EVs. Thereafter attaching Velcro will not be an issue.Arun, how did you stick your FC12 and EV1s to the pedal board? I also have the same setup. The reason I ask is as I noticed small bumps beneath the FC12 .... and 6 small grips beneath the EV1s. So the velcros wont fit.
Can you upload a pic?
Arun, how did you stick your FC12 and EV1s to the pedal board? I also have the same setup. The reason I ask is as I noticed small bumps beneath the FC12 .... and 6 small grips beneath the EV1s. So the velcros wont fit.
Can you upload a pic?
Hi mate,
I designed the 'GloRiser' solutions specifically for this reason. Allows you to mount pedals and boards without removing feet and, if you're really feeling glamorous, you can light it up too! Check them out here:
View attachment 57810
What is the pedal board you're using under the FC-6 and Mission Pedal?
A Temple Audio board - very nice
Looking awesome....Hi mate,
I designed the 'GloRiser' solutions specifically for this reason. Allows you to mount pedals and boards without removing feet and, if you're really feeling glamorous, you can light it up too! Check them out here:
http://www.zenrigs.com/epages/es138465.sf/en_GB/?ObjectPath=/Shops/es138465/Categories/Buy_Stuff/"GloRiser - Mounts / Lighting Platforms"
View attachment 57810
Thanks Arun, that is what I guess will have to do.Hi. You will have to remove the rubber ends on FC 12 and rubber feet in EVs. Thereafter attaching Velcro will not be an issue.