Bug? Possible Reverse Delay Spillover Bug, or Possibly Me Being Naive

nojyeloot

Experienced
I can't seem to get the reverse delay to spill over between scenes 2 and 3 on my preset. I use one delay block (X = Analog Mono & Y = reverse delay). I have no problem going from scenes with the analog mono delay to the reverse delay, but going the opposite direction causes the reverse delay trails to just stop. Both are in the same delay block, in parallel to the signal chain and set to mute fx in.

Is this a bug or is this how it's meant to be? (Don't want to be presumptuous).

As always, I'm very grateful for FAS's work and any help. Thanks guys.
 

Attachments

  • FOREVER (GATEWAY).syx
    6.3 KB · Views: 1
  • analog.png
    analog.png
    290.2 KB · Views: 5
  • reverse.png
    reverse.png
    291.9 KB · Views: 4
You need to set up two different delay blocks from what you described thats why...delay 1 X to delay 2 X thats how you'll get the spill. If you have just delay 1 X going to delay 1 Y your cutting the sound when you switch the scene
 
By the way if thats Kari Jobes song your playing I'm assuming tomrrow try using the multi delay and set the direction to reverse instead. Use a volume pedal for the intro riff and very subtlety swell in pure bliss.
 
Back
Top Bottom