Possible Bug - Preset Corrupts when Setting NoiseGate to "Off" with Modifier

sprint

Axe-Master
If you put a modifier on the noisegate block's threshold parameter with minimum value set to -100, then set the external switch/pedal to off/minimum position, the preset appears to corrupt in that all blocks within the preset seem to then have a type value of "Off" (i.e. after setting noisegate threshold to -100 with an external switch via modifier, go to your AMP block and see your amp name now = "Off", or, go to Cab block and see Cab type now = "Off" and cannot be changed to another value).

The workaround for me is to set the noise gate modifier to minimum=-99 to avoid the corruption (or remove the modifier from the NG).

AE was not used in testing related to this issue.

Been tearing my hair out this week on this while trying to put a pedal on my noise gate threshold in all my presets. I basically corrupted all my presets twice before figuring out what was going on, then realized I just had to do the workaround indicated above.

Head up!
 
Last edited:
Back
Top Bottom