Fixed Pitch block mix won't stay at 100%

fremen

Axe-Master
Vendor


I need the mix parameter of the Pitch block to be 100% both on channel A & B (using custom scales for the lead here). But each time it goes back to 50%, after being saved with the correct setting.
 
Same issue over here.
And it does not matter if you are connected to FMEdit, or if you saved or not the preset, or the CPU use.
It just returns to 50% Mix.
 
Just encountered this today. Does anyone know of a temporary workaround that makes it possible to use the pitch block?
 
That’s the idea, but i don’t know how. What combination of blocks will make the pitch block at 50% sound exactly as if it were at 25% at the same volume?
Set the individual voice levels at around 50% and set the block Level at around +5 dB to match the bypassed level?
 
I’ve noticed the same in my clean patch. Have crystal echoes set at about 12%, but always is at 50% when I re engage. Will be great to get this fixed 👍
 
Back
Top Bottom