Wish PEQ Block - Allow all bands to be set below 100 Hz

[Jason Scott]

I'd find it extremely helpful / useful if I could use more than one band for shaping the low-end below 100 Hz, because I currently have to use multiple PEQ or Filter blocks. Let's say I need 3 bands, well, that's 3 blocks. While I'm on the subject, I realize some people think there's not a lot happening beyond 9 Khz or 10 KHz, however if you look at a spectrum analyzer, you can see activity in the 13 KHz and 14 KHz areas in some instances, so if it's possible to allow more than one band to be set above 10 KHz, that would also be useful, in my opinion.

 

[flying_walrus]

Curious what speakers/IRs you’re using that are reproducing guitar below 100hz and above 10khz?

 

[Jason Scott]

Curious what speakers/IRs you’re using that are reproducing guitar below 100hz and above 10khz?

The better question is which ones don't. It's why a lot of people use the hi and low cut parameters in the Cab block.

 

[Tahoebrian5]

A 5 band paragraphic addition would be cool where you could freely select each center freq

 

[Jason Scott]

A 5 band paragraphic addition would be cool where you could freely select each center freq

The PEQ block is essentially a paragraphic EQ.

 

[Tahoebrian5]

The PEQ block is essentially a paragraphic EQ.

True, there is something about the graphic visual that I miss with the para though. Even better would be an onscreen visual similar to DAW style eq plugins with dragable nodes. Sorry getting off topic though

 

[Ratbun]

i second the need for multiple bands capable of centering below 100Hz.

 

[shatteredsquare]

+1, I bumped into that very thing a couple days ago, only the one band can do anything at lower than 100Hz...that's just barely above where 95% of the meat and potatoes of a 4x12 fundamental is, between 70 and 90 hz