philipacamaniac
Fractal Fanatic
There seems to be something amiss with the Out 2 Block. If you send a test signal (either through an input, or the Synth block) to both the Out 1 and Out 2 blocks, the signal going into the Out 2 Block is about 20 dB quieter.
The physical Output 2 isn't the issue - using the Output 2 Copy = Output 1 setting will produce a signal on the Output 2 jacks that is identical in level to Output 1. It's only the Out 2 Block on the grid that seems to be the issue. The "fix" is to crank the block's input row levels by 20 dB (or in my testing, it was 19.9 dB).
Output 2 Boost/Pad has no affect on the Out 2 Block internal level. Phase and Stereo Mode also have no affect. Note - those settings do affect the sound coming out of the jacks, but they are applied after the grid block.
Can anyone else reproduce this, and am I missing something?
The physical Output 2 isn't the issue - using the Output 2 Copy = Output 1 setting will produce a signal on the Output 2 jacks that is identical in level to Output 1. It's only the Out 2 Block on the grid that seems to be the issue. The "fix" is to crank the block's input row levels by 20 dB (or in my testing, it was 19.9 dB).
Output 2 Boost/Pad has no affect on the Out 2 Block internal level. Phase and Stereo Mode also have no affect. Note - those settings do affect the sound coming out of the jacks, but they are applied after the grid block.
Can anyone else reproduce this, and am I missing something?