Options for the 5 knobs below the AXE FX III window ..........

P

playingitloud

Inspired
Would it be possible to make the 5 knobs below the AXE FX III window set up for Gain, Bass, Mids, Treble, Presence or Master Volume?

Originally, I assumed that we were going to use those knobs for quickly tweaking those five things on our amps.

I had purchased a RAC 12 for my XL+ for this reason, so I would love to have the ability to quickly turn a few knobs like an amp :)
 
Last edited:
Implemented in Firmware 6.00

From Release notes:
"Firmware 6.00 introduces the PERFORM tabs found on the HOME screen of the Axe-Fx III. There are two PERFORM tabs: Per-Preset and Global. The PERFORM tabs can be configured with up to 10 user-selected controls from any of the blocks found in the current preset (including CONTROLLERS and GLOBAL). Configuration of the PERFORM tabs is done via Axe-Edit III. Allowable controls include rotary knobs, push-buttons, drop-downs, and toggle controls (e.g., on/off controls).
The "Perform-PP" controls are stored per-preset. Adding or removing a control from "Perform-PP" will change the EDIT state of the preset.
The "Perform-Gbl" controls are stored in the Global Settings. Adding or removing a control from "Perform-Gbl" is automatically saved to the Global Settings.
Performance controls are added via the editor from a block's parameter view. The editor's selected parameter control is assigned to the desired Performance tab through a popup menu or a hot-key combination. [Please note the "Edit Modifier..." popup menu item for modifiable parameters. Modifiable parameters can quickly jump to the "Edit Modifier" dialog by pressing the hotkey 'M'.]
Hotkey assignments for Perform controls:
  • Per-Preset Add: SHIFT + '1' through '0', where '0' is the tenth control on the tab.
  • Per-Preset Remove: SHIFT + ALT + '1' through '0', where '0' is the tenth control on the tab.
  • Global Add:
  • Mac: COMMAND + F1 through F10.
  • Windows: CTRL + F1 through F10.
  • Global Remove:
  • Mac: COMMAND + SHFIT + F1 through F10.
  • Windows: CTRL + SHIFT + F1 through F10.
The editor's Perform view is accessed via the "Perform" button or the Tools / Performance menu. From this view, Per-Preset Performance controls can be imported and/or exported using the "Block Library" control. Additionally, the view's "Per-Preset" and "Global" tabs allow label editing for controls already assigned to the "Perfrom-PP" and "Perform-Gbl" tabs."
 
JoKeR III said:
Implemented in Firmware 6.00

From Release notes:
"Firmware 6.00 introduces the PERFORM tabs found on the HOME screen of the Axe-Fx III. There are two PERFORM tabs: Per-Preset and Global. The PERFORM tabs can be configured with up to 10 user-selected controls from any of the blocks found in the current preset (including CONTROLLERS and GLOBAL). Configuration of the PERFORM tabs is done via Axe-Edit III. Allowable controls include rotary knobs, push-buttons, drop-downs, and toggle controls (e.g., on/off controls).
The "Perform-PP" controls are stored per-preset. Adding or removing a control from "Perform-PP" will change the EDIT state of the preset.
The "Perform-Gbl" controls are stored in the Global Settings. Adding or removing a control from "Perform-Gbl" is automatically saved to the Global Settings.
Performance controls are added via the editor from a block's parameter view. The editor's selected parameter control is assigned to the desired Performance tab through a popup menu or a hot-key combination. [Please note the "Edit Modifier..." popup menu item for modifiable parameters. Modifiable parameters can quickly jump to the "Edit Modifier" dialog by pressing the hotkey 'M'.]
Hotkey assignments for Perform controls:

    • Per-Preset Add: SHIFT + '1' through '0', where '0' is the tenth control on the tab.
    • Per-Preset Remove: SHIFT + ALT + '1' through '0', where '0' is the tenth control on the tab.
    • Global Add:
    • Mac: COMMAND + F1 through F10.
    • Windows: CTRL + F1 through F10.
    • Global Remove:
    • Mac: COMMAND + SHFIT + F1 through F10.
    • Windows: CTRL + SHIFT + F1 through F10.
The editor's Perform view is accessed via the "Perform" button or the Tools / Performance menu. From this view, Per-Preset Performance controls can be imported and/or exported using the "Block Library" control. Additionally, the view's "Per-Preset" and "Global" tabs allow label editing for controls already assigned to the "Perfrom-PP" and "Perform-Gbl" tabs."
Click to expand...
Note that these keyboard commands have been replaced by the drag and drop I show in the video.
 
You must log in or register to reply here.
Back
Top Bottom