[Edit] Hi @austinbuddy and @FractalAudio
I have found the following with a few presets in the old pack this evening - Currently, I've got 'High100W Plexi AX3' loaded and it's quite repeatable... but only with certain presets... this is a good example.
[/Edit]
AXE FX III Mk 2
Axe Edit III 1.08.01
Windows 10 2004 updated
Using Analog out to mixer
Midi foot control
USB for midi from computer
I've been noodling this evening and was playing a clean AB preset from his Gold pack, when I noticed clicks and pops happening occasionally. Sort of sounded like electrical clicks and pops but this room has a pretty clean supply.
Anyhow - This seems to happen with a number of these presets, and watching the Layout grid meters, I noticed when it happens that the 'Return' block registers the clicks and pops ... Nothing in the send block, nor any of the other blocks from the input to the send.
I cannot share one of the presets that's doing it, because they are commercial ... so I made a preset with just input->Send->Return->Output. That did not display the problem.
Then I went back to the offending preset, and turned the noise gate (on the input block) off (By minimising the threshold)... That got rid of it!....I experimented with increasing the attack and release times with no result. The noise gate type was the 'Intelligent', and the 'Noise reducer also does it'. Turning the noise gate on, causes clicks and pops!
So.. back to the test preset, add intelligent noise gate.... nothing.. no clicks and pops.
So.. Back to another AB gold pack preset... it does the same thing!... Disable the noise gate, fixed,,, enable it again... clicks and pops!
Then... to another preset... one of Burgs... It has the noise gate enabled, and a send/return, but no clicks and pops!
I'm stumped
FractalAudio -Could this be a bug? I don't know how, as it's only in AB's presets (that I've found) however it's very repeatable so maybe there's some secret sauce in his presets that's just the right conditions.
Thanks for listening
Pauly
I have found the following with a few presets in the old pack this evening - Currently, I've got 'High100W Plexi AX3' loaded and it's quite repeatable... but only with certain presets... this is a good example.
[/Edit]
AXE FX III Mk 2
Axe Edit III 1.08.01
Windows 10 2004 updated
Using Analog out to mixer
Midi foot control
USB for midi from computer
I've been noodling this evening and was playing a clean AB preset from his Gold pack, when I noticed clicks and pops happening occasionally. Sort of sounded like electrical clicks and pops but this room has a pretty clean supply.
Anyhow - This seems to happen with a number of these presets, and watching the Layout grid meters, I noticed when it happens that the 'Return' block registers the clicks and pops ... Nothing in the send block, nor any of the other blocks from the input to the send.
I cannot share one of the presets that's doing it, because they are commercial ... so I made a preset with just input->Send->Return->Output. That did not display the problem.
Then I went back to the offending preset, and turned the noise gate (on the input block) off (By minimising the threshold)... That got rid of it!....I experimented with increasing the attack and release times with no result. The noise gate type was the 'Intelligent', and the 'Noise reducer also does it'. Turning the noise gate on, causes clicks and pops!
So.. back to the test preset, add intelligent noise gate.... nothing.. no clicks and pops.
So.. Back to another AB gold pack preset... it does the same thing!... Disable the noise gate, fixed,,, enable it again... clicks and pops!
Then... to another preset... one of Burgs... It has the noise gate enabled, and a send/return, but no clicks and pops!
I'm stumped
FractalAudio -Could this be a bug? I don't know how, as it's only in AB's presets (that I've found) however it's very repeatable so maybe there's some secret sauce in his presets that's just the right conditions.
Thanks for listening
Pauly
Last edited: