Thanks for your support in picking up those packs. I’d say 95% of YA users stick to the Mixes folder, so I would start there. Pick your cab, load Mix 01, and dial in your amp to sound good with that IR. Then, you can try other Mixes to see which ones have a tonal character you like and re-tweak your amp settings if necessary.So I bought a few packs…
Matchless
Evh
Blackjack
Bogna
Is it me or do they feel more “Alive” or more “guitar cab” through my CLR…
Also the different choices seem subtle …unlike the stock cabs and other irs…
Final question…. Do you prefer mixes or single mics?
Thank youThanks for your support in picking up those packs. I’d say 95% of YA users stick to the Mixes folder, so I would start there. Pick your cab, load Mix 01, and dial in your amp to sound good with that IR. Then, you can try other Mixes to see which ones have a tonal character you like and re-tweak your amp settings if necessary.
A lot of IRs can sound similar if they’re being auditioned with a clean tone, so I recommend auditioning IRs with a bit of overdrive to hear more of the character each IR has. That way, you’ll get great tones clean and dirty.
I hope this helps, and feel free to PM me if you have any questions or need any help.
Have a great day!
-Justin York
Yes, if you want to keep the sound as close as possible to the real cabinet mic’d up in my studio. I would start there and tweak your amp to sound great with the IR “untouched” for the most natural results.Need some help please...
Do I understand it rigth that if I'm using a YA IR in a CAB block I need to:
- set HICUT to 20k
- set PROXIMITY to 0
- set ROOM to 0
- set AIR to 0
- as I'm using Axe FX 2 so I set the mic to None