New firmware for LF+ with lots of goodies

voes

Fractal Fanatic
Vendor
new firmware for the LF+ series is out.
some great features where added: EXPR connection can now control 2 Buttons, Page swapping, Status #1 LED color can be programmed, ...

v1.66

-------------------

- new: (beta) Expression pedals: New Type "2 Page buttons" -- 1 expression pedal can now control 2 page buttons.
Parameter are the Page buttons to trigger. You must calibrate with both switches prior to use

- special wiring- momentary switch #1 should connect Tip/Sleeve.
- Switch #2: (Ring) 1K Resistor to 1.8k Resistor to (Sleeve). Switch connects Tip to center of network (point "C")


1K ohm 1.8k ohm
RING--/\/\/\-----C------/\/\/\--SLEEVE

connect momentary switch between TIP and "C"


- new: Programming Command: "Resend All I-IA States" -- forces the system to resend all Presets initial IA States again

- new: Programming Command: "STORE SONG" - stores the currently active song in song or set-list mode

- new: Programming Command: "RECALL SONG" - Moves the current song to the previously stored SONG if valid

- new: Programming Command: "CHANGE SONG" - lets you select the song # to make active in Song mode
(if in set-list mode: this will not work if the song# is not found in the set-list)

- new: Programming Command: "Page Function Swap" - will force all buttons on current page to toggle from ALL FUNCTION #1 to
all Function #2. If currently set to all function #2, then it swaps all buttons back to #1.

- mod: When using the (save/copy) presets feature (and all changes to the IA states) it will immediately transfer the data to expanders without need to sync

- fix: preset button hold timing before "save preset" is selected was fixed. its now back to 3 seconds instead of 1/2 second



v1.65
-------------------
- new: Programming Command: Set Status LED#1 Color (usable to set the color of the status #1 LED from Preset, IA-Switch, etc...)
(this command works on 12, 12+, Pro, Pro+ of the LF+ Series Controllers only)

- new: Programming Command: Automatic Tap-Tempo (set the parameters to the TAP speed in milliseconds, and the IA switch)
this command will auto-tap for you. This is useful when using the same presets on several songs with different speeds.
example usage: Add an Auto-Tap-Tempo command to a song. When the song triggers, it will do 4 taps of the Tap-Tempo to
the speed you select. example: Assume Ia-Slot 59 are your tap commands. then set the delay to 600ms,
and with IA-Slot 59. The LF+ will Tap-Tempo 100 BPM. It should get within 1ms depending on
your effects unit processing speed.

- mod: MIDI TIME CODE: When you set the LF+ for MTC in Master Mode, it will now display real-time SMPTE in HH:MM:SS as it
is transmitting. Frames are not displayed on the LCD but are transmitting. Rate set to 24 Frames/Sec

- mod: MTC now works to control Logic, Pro-Tools and all standard DAW machines. LF+ Will Locate to song-pointers set for each Song

- fix: updated some menu items which weren't displaying parameter info on LCD's correctly.

- mod: updated expansion output to support "hub" connected devices soon available.
 
Last edited:
Back
Top Bottom