Multiplexer-Modifiers-Channels

[Narzugon]

I can't get the Multiplexer's Modifier page to work with the Multiplexer's Channels. What am I missing?

Example:

MP Channel A: Input Select - Modifier - Min Row 2 and Max Row 3 - Channel A
MP Channel B: Input Select - Modifier - Min Row 2 and Max Row 4 - Channel B

Two odd things are happening when I set this up:

First and most importantly, when I configure Channel B for the Multiplexer as illustrated above, it changes the settings for Channel A for the Multiplexer.

Secondly, when I try to configure the Channel in the modifier page, the drop down menu isn't allowing selection correctly. For example: When selecting Channel B from the drop down, it selects Channel A. Selecting Channel C selects Channel B etc. Selecting All or Channel A works correctly.

Thanks

 

[Bakerman]

Modifier settings can't be altered per channel like that. It's one set of modifier values that applies to all channels, or just one channel.

There's probably another way to set up what you're aiming for with a little routing/muting setup before the multiplex block.

The channel selection thing sounds like an AE bug.

 

[Narzugon]

Gotcha. Thanks for the reply!