mounting mission sp1 onto pedaltrain problem.

[adildo]

Hey guys don't know you solve this issue, but I realized after taking off the rubber feet from the mission sp1 that the screw's are too long and don't hold the backplate of the wah very well anymore.
Has anyone had difficult y mounting the sp 1 on the board? I've tried looking for smaller screws but can't find them anywhere here. Seen some ppl use a picee of rubber on the back of the sp 1 to compensate for the feet not being there

 

[yek]

Pedal Riser Kit | missionengineering.commissionengineering.com

Or keep the feet attached, and use a really thick layer of Velcro to attach the pedal.

 

[Johan Allard]

I use the pedal riser kit. Works really well.

 

[adildo]

Pedal Riser Kit | missionengineering.commissionengineering.com

Or keep the feet attached, and use a really thick layer of Velcro to attach the pedal.

Damn didn't know about that should have ordered it wit the mission.!

 

[fox5150]

I've got both of mine mounted with the riser. Does exactly what it says and works like a charm.

 

[npx]

Hey guys don't know you solve this issue, but I realized after taking off the rubber feet from the mission sp1 that the screw's are too long and don't hold the backplate of the wah very well anymore.

If you happen to have any old hard drive mounting screws lying around, they are the perfect size and thread for this. Way cheaper than that Pedal Riser Kit!

 

[adildo]

Ooooo must check that out

Sent from my Nexus 7 using Tapatalk