Mosky Dual Switch?

budda007

Inspired
I know a lot of guys are using the Mosky Dual Switch. Can you program one of the switches to hold for Tuner and Tap for tempo? I can only figure out one switch for Tap and the other switch for Tuner? What settings am I doing wrong?
Thanks in advance!
 
I know a lot of guys are using the Mosky Dual Switch. Can you program one of the switches to hold for Tuner and Tap for tempo? I can only figure out one switch for Tap and the other switch for Tuner? What settings am I doing wrong?
Thanks in advance!
Have been wondering the same thing - following.
 
To use both tap and hold functions, you need to configure it as a stand-in switch. Set up a switch in one of the FC controller layouts to function as tap tempo and hold tuner. Then assign one of your Mosky switches as a stand-in switch for that same switch position in the FC layout.
 
Last edited:
You have to assign the switches to a function in FM3 Edit and tell the FM3 what switch you have there in the Setup Menu
Here my notes for a reset:

Setup Menu
FCControllers/Onboard Switches
Stand-In-Switches:
FM3 SW2 TIP: Layout 8: Utilities - Switch 6: Layout, Inc/Dec
FM3 SW2 RING: Layout 8: Utilities - Switch 4: Scene, Inc/Dec

Setup Menu
I/O:
Pedal:
Pedal 2 Setup:
2 Switches (Tip+Ring)
Switches setting:
Switches Behavior - Follow Hardware
Polarity - Normally Open/Momentary Make
FM3 EDIT
FC Controllers
 
Back
Top Bottom