Yes but you don't need a dual-output expression pedal for that.Would I be able to assign the fm9 to bypass the volume when engaging the wah via a control switch?
I tried with the Dunlop pedal but couldn’t figure it out without having to use scenes. and everything I read said that was the only way. Please adviseYes but you don't need a dual-output expression pedal for that.
Which method should I be trying?Did you get a control switch assigned to vol/pan & wah block bypasses so it engaged one at a time?
The expression pedal should be assigned as modifier source for wah control and vol/pan volume parameters. Or you can use a multiplexer to switch between a wah & shunt row if you want to use autoengage on the wah.
https://wiki.fractalaudio.com/wiki/...witches#Use_a_single_pedal_for_multiple_tasks
Method 2; just select a control switch instead of Ext Ctrl n for the bypass parameters. Also at Controllers: CS Per Scene set values to "last" for this CS in all scenes if you don't want any scenes to force the switch state to wah or volume mode.Which method should I be trying?
Wonderful when I get the chance to attempt this set up I’ll report back. Thank you again.Method 2; just select a control switch instead of Ext Ctrl n for the bypass parameters. Also at Controllers: CS Per Scene set values to "last" for this CS in all scenes if you don't want any scenes to force the switch state to wah or volume mode.
That worked, thank you for your help.Method 2; just select a control switch instead of Ext Ctrl n for the bypass parameters. Also at Controllers: CS Per Scene set values to "last" for this CS in all scenes if you don't want any scenes to force the switch state to wah or volume mode.