-
We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.
Please give yourself a refresher on the forum rules you agreed to follow when you signed up.
Look at this expression pedal!
- Thread starter GuyJames
- Start date
GuyJames
Inspired
Does anyone have experience with the Boss EV-30? https://www.sweetwater.com/store/detail/EV30--boss-ev-30-dual-expression-pedal
It doesn’t look like it says anything about a toe switch so I imagine it’s just two trs cable. Would I be able to assign the fm9 to bypass the volume when engaging the wah via a control switch?
It doesn’t look like it says anything about a toe switch so I imagine it’s just two trs cable. Would I be able to assign the fm9 to bypass the volume when engaging the wah via a control switch?
Yes but you don't need a dual-output expression pedal for that.
GuyJames
Inspired
I tried with the Dunlop pedal but couldn’t figure it out without having to use scenes. and everything I read said that was the only way. Please advise
Did you get a control switch assigned to vol/pan & wah block bypasses so it engaged one at a time?
The expression pedal should be assigned as modifier source for wah control and vol/pan volume parameters. Or you can use a multiplexer to switch between a wah & shunt row if you want to use autoengage on the wah.
https://wiki.fractalaudio.com/wiki/...witches#Use_a_single_pedal_for_multiple_tasks
The expression pedal should be assigned as modifier source for wah control and vol/pan volume parameters. Or you can use a multiplexer to switch between a wah & shunt row if you want to use autoengage on the wah.
https://wiki.fractalaudio.com/wiki/...witches#Use_a_single_pedal_for_multiple_tasks
GuyJames
Inspired
Which method should I be trying?
Method 2 involves an external controller? I’m just using FM9 switches
Method 3 I don’t want to be restrained to scenes.
Method 4 I’ll have to explore
Method 5 I currently use but I’m trying to downsize pedals…
Method 2; just select a control switch instead of Ext Ctrl n for the bypass parameters. Also at Controllers: CS Per Scene set values to "last" for this CS in all scenes if you don't want any scenes to force the switch state to wah or volume mode.
GuyJames
Inspired
Wonderful when I get the chance to attempt this set up I’ll report back. Thank you again.
GuyJames
Inspired
That worked, thank you for your help.