Tone_Loc
Member
Firstly, can any LF+ users confirm this:
Background: I have programmed preset holders to buttons 2 & 3 utilising both short and long press. i.e button 2 short = preset holder #1, button 2 long press = preset holder #2 etc.
So each bank has a total of 4 presets. The rest are taken up with IA's, Tuner & Context up/down.
Need to know, when button 2 "long press" is executed, does the small LED above the button change to the correct preset info?
The preset itself is engaged and info is displayed on the main screen however the small LED doesn't change. I've been in touch with Jeff and suspect the latest firmware release included a fix to this however its still not working. Obviously, I've let him know about it however I'm just curious if other users have experienced the same issue. This was never an issue with earlier firmware versions.
The reason this is an issue for me is it doesn't allow me to "reset" the preset to its original state after I've engaged a series on IA's by way of re-pressing the same preset as its still pointing to "short press" preset.
I've not heard back from Jeff in quite a while now so I think this has been placed in the "too hard" basket.
With that in mind, I would be grateful for any alternative suggestions or approach to my programming, bearing in mind that I dont follow a rigid structure when playing the songs. i.e song A has patch 2 for verse then patch 2 with flanger for the pre-chorus etc. I tend to just go with the flow and mix and add IA's to please, during a song.
TIA
Background: I have programmed preset holders to buttons 2 & 3 utilising both short and long press. i.e button 2 short = preset holder #1, button 2 long press = preset holder #2 etc.
So each bank has a total of 4 presets. The rest are taken up with IA's, Tuner & Context up/down.
Need to know, when button 2 "long press" is executed, does the small LED above the button change to the correct preset info?
The preset itself is engaged and info is displayed on the main screen however the small LED doesn't change. I've been in touch with Jeff and suspect the latest firmware release included a fix to this however its still not working. Obviously, I've let him know about it however I'm just curious if other users have experienced the same issue. This was never an issue with earlier firmware versions.
The reason this is an issue for me is it doesn't allow me to "reset" the preset to its original state after I've engaged a series on IA's by way of re-pressing the same preset as its still pointing to "short press" preset.
I've not heard back from Jeff in quite a while now so I think this has been placed in the "too hard" basket.
With that in mind, I would be grateful for any alternative suggestions or approach to my programming, bearing in mind that I dont follow a rigid structure when playing the songs. i.e song A has patch 2 for verse then patch 2 with flanger for the pre-chorus etc. I tend to just go with the flow and mix and add IA's to please, during a song.
TIA