MrPond
Experienced
Hi folks!
I think i need your help ... I normally have an out 1 (FOH) and out 2 block (running straight into Boss RC-5 and then into my Power Stage 170 poweramp), my amps were (with 3.0.2) around + 1/2/3db, out 1 is around -18 db and out 2 at level 0 db - that worked fine for me!
This setup does not work with Cygnus: 2R/2L is really low, but increasing amp levels end up in clippings.
Cygnus includes new output parameters to control out 2 (Unity Gain, Line Level -10/+4)
Visually, i can get an almost similar experience setting amp blocks around -12 db, out 1 and out 2 level at 0 db and line level setup mode with -10.
The question is: Am i right? Would be this the way to go? If my out 2 keeps under 0db, everything (my rc-5 and powerstage) should be working fine, right? ...
I would love to see an updated guide to level everything.
Thanks in advance!
Niklas
I think i need your help ... I normally have an out 1 (FOH) and out 2 block (running straight into Boss RC-5 and then into my Power Stage 170 poweramp), my amps were (with 3.0.2) around + 1/2/3db, out 1 is around -18 db and out 2 at level 0 db - that worked fine for me!
This setup does not work with Cygnus: 2R/2L is really low, but increasing amp levels end up in clippings.
Cygnus includes new output parameters to control out 2 (Unity Gain, Line Level -10/+4)
Visually, i can get an almost similar experience setting amp blocks around -12 db, out 1 and out 2 level at 0 db and line level setup mode with -10.
The question is: Am i right? Would be this the way to go? If my out 2 keeps under 0db, everything (my rc-5 and powerstage) should be working fine, right? ...
I would love to see an updated guide to level everything.
Thanks in advance!
Niklas