yek
Contact Fractal for your Custom Title
Here's how to engage a simulated Whammy, without using Auto Engage.
Why? Auto Engage can sometimes be annoying, switching off the effect when you don't want to.
Also, engaging/bypassing the block through Auto Engage is sometimes audible.
I'm borrowing the "Golden Whammy" idea by Matman (Admin M@) here.
Put a Pitch block in line, set to Classic Whammy. Source = Global. Bypass Mode = Thru.
Assign the Control parameter to your pedal's external controller.
Assign the same external controller to the Mix parameter. Set Mix at zero.
In the modifier menu do this:
Start: 40
Mid: 100
End: 55
Slope: 0
Scale: 10
Offset: 100.
Make sure the Pitch bock is engaged and save the preset.
With this configuration the Pitch block (Whammy) is always active, but you won't hear it because Mix is 0%.
The modifier settings make sure that whenever you rock the pedal, Mix is immediately changed to 100% so you have a fully functional Whammy pedal and you can use its full sweep range. Plus, there's no audible "click".
Why? Auto Engage can sometimes be annoying, switching off the effect when you don't want to.
Also, engaging/bypassing the block through Auto Engage is sometimes audible.
I'm borrowing the "Golden Whammy" idea by Matman (Admin M@) here.
Put a Pitch block in line, set to Classic Whammy. Source = Global. Bypass Mode = Thru.
Assign the Control parameter to your pedal's external controller.
Assign the same external controller to the Mix parameter. Set Mix at zero.
In the modifier menu do this:
Start: 40
Mid: 100
End: 55
Slope: 0
Scale: 10
Offset: 100.
Make sure the Pitch bock is engaged and save the preset.
With this configuration the Pitch block (Whammy) is always active, but you won't hear it because Mix is 0%.
The modifier settings make sure that whenever you rock the pedal, Mix is immediately changed to 100% so you have a fully functional Whammy pedal and you can use its full sweep range. Plus, there's no audible "click".
Last edited by a moderator: