GLOBAL BOOST problem. Help. Axe-Fx III & MFC-101

Hi, doing a global boost (as per ).

Using AXFX111 with MFC101 (everything else works as I want it to).

The issue being that:
* It works but when i change patches, the boost is still on. (it then takes 2 hits to get back to MIN)

How do i get it to reset to MIN on new PRESET selection?

Thanks in advance.
Peter
 
I think you need to enable the "Send w/Preset" and "Global" options for that switch.
 
ahhh yes, but im sending via a External Switch.
I can can SEND W/PRESET on IA 1 to 17.
I cant seem to find SEND W/PRESET for XS
 
Ah, yes, it works that way with external switches and the MFC. A latching switch needs to resync after preset switching. No way around it, alas.

If you have a momentary switch laying around, you might try connecting that and configuring it to act as a latching type. Not sure, but it might work better.

It's been a while since I used the MFC. @Bakerman usually knows all the tricks.
 
Or if you have a small exp pedal somewhere, connect it and change its range to (i.e.) 105 - 127.
 
Yeah, I see.

A Filter Boost, controlled through an external latching switch, will suffer from the same resync issue though.
 
Back
Top Bottom