Gift of Tone #10: COOPER CARTER

Admin M@

Admin M@

Administrator
Fractal Audio Systems
Moderator
1670598740820.png
Be sure to watch the video on the downloads page for details on the presets.
https://www.fractalaudio.com/gift-of-tone/#10

NOTE: Friday Dec 9, 7PM EST: A new zip file was uploaded to circumvent an issue with Axe-Edit setting modifier scale incorrectly to 0% when importing presets originally created on FM3 or FM9. If you downloaded earlier and are using Axe-Fx III, please re-download again now.​
 
Last edited:
I am having a lot of problems with the modifiers in preset CC's Sound on Sound on my FX III.
  1. Modifier for Volume/Pan does not work when moving the pedal - it stays on 0
    When I remove the modifier and insert again it works fine.
  2. Same applies for Reverb -Stack/Hold and Delay - Repeat Stack/Hold. Parameters do not change when changing scenes.
    When I remove the modifier and insert again it works fine.
  3. The Modifier page displays Enevelope Follower for Reverb1(Mix).
    1670605821418.png
    However in the Reverb block there is no modifier attached to Mix.
    1670606047792.png

I am running Fw 21.01 with AXE-Edit III 1.12.11 on Windows 10.
 

Attachments

  • 1670605893932.png
    1670605893932.png
    25 KB · Views: 2
  • 1670605913126.png
    1670605913126.png
    55.3 KB · Views: 2
HaPe57 said:
I am having a lot of problems with the modifiers in preset CC's Sound on Sound on my FX III.
  1. Modifier for Volume/Pan does not work when moving the pedal - it stays on 0
    When I remove the modifier and insert again it works fine.
  2. Same applies for Reverb -Stack/Hold and Delay - Repeat Stack/Hold. Parameters do not change when changing scenes.
    When I remove the modifier and insert again it works fine.
  3. The Modifier page displays Enevelope Follower for Reverb1(Mix).
    View attachment 112459
    However in the Reverb block there is no modifier attached to Mix.
    View attachment 112462

I am running Fw 21.01 with AXE-Edit III 1.12.11 on Windows 10.
Click to expand...

You should check out the video to answer your questions.

1) it sounds like your External 1 isn't connected to Pedal 1 in your global settings
2) these only change in certain scenes, i.e. only on for Reverb in Scenes 2 and 3; only on for Delay in Scene 5.
3) you're looking at the wrong mix. The Envelope Follower is attached to the Pitch Shift mix, not the block mix.

Hope that helps -- but check out the video if you're still unsure of how to use it!
 
Mr Carter! Once again, your generosity and dedication strikes true.
Beautiful preset (which sounds beautiful on humbucker-equipped guitars too!) and a great lesson on how to use the monstrous resources of our FM/AFX units.
Thank you!
 
I've used a CS and mapped it to my FC6 for a reverb hold. But doing that I always needed to then manually adjust the reverb mix up since I usually keep it around 10% but then needed to increase it for the pad. Never thought of just switching scenes and adding something like the PlexDly in parallel.
Thanks!
 
You must log in or register to reply here.
Back
Top Bottom