• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Expression pedal with MMGT 16 unable to control volume block in Axe 3 - Resolved!

M

markiv

Member
Need some help. Noticed that after updating to FW 18, I am no longer able to control the volume block of my Axe 3 presets.

I have done the necessary troubleshooting as follows:

1. Ensured settings in my MMGT 16 and Axe 3 are all done correctly, including assigning the correct CC numbers (e.g CC#11 for External Control 1, etc)
2. Ensured that both my connecting stereo cable and expression pedal works (Note: It works when i connect it directly to my Axe 3, and i am able to calibrate it when connected to my MMGT)
3. Ensured that External Control 1 is assigned to the Volume block under the modifier section. However, the linear graph no longer moves up and down when I move the expression pedal assigned)

1640618075639.png

Anyone else experiencing this post FW18 upgrade? Desperately need help here! Thanks guys...
 
unFILTERed

unFILTERed

Power User
Do you see incoming midi message light blinking on Axe Fx when you move the pedal? There are ways to assign an expression pedal to different CCs on MMGT and change the CCs with buttons to whatever you want (which is a great feature, FC owner should ask for IMHO) but being this advanced of a controller, MMGT makes also the door wide open for user programming mistakes.

add: check if the button has the same midi channel number as Axe FX, you can program/change on the fly also any button’s/exp pedal’s midi channel number on MMGT.
 
Last edited:
M

markiv

Member
unFILTERed said:
Do you see incoming midi message light blinking on Axe Fx when you move the pedal? There are ways to assign an expression pedal to different CCs on MMGT and change the CCs with buttons to whatever you want (which is a great feature, FC owner should ask for IMHO) but being this advanced of a controller, MMGT makes also the door wide open for user programming mistakes. add: check if the button has the same midi channel number as Axe FX, you can program/change on the fly also any button’s/exp pedal’s midi channel number on MMGT.
Click to expand...

Yups, checked to ensure both the CC numbers in the Axe 3 setup page and MMGT settings are the same. Yet, still unable to control the volume block when I assign the expression pedal to it.
 
Satch4u3

Satch4u3

Experienced
I tested my MMGT16 (firmware 4.7.0) with my Axe Fx 3 (Firmware 18.03) and it tested fine using an expression pedal.
 
M

markiv

Member
Finally managed to get the expression pedal working in the modifier section of the volume block! For some strange reason, after reinstalling FW 18.03, I refreshed Axe edit and viola....it works now. Really strange indeed!
 
You must log in or register to reply here.
Top Bottom